Yamaha VX WaveRunner 2007 Скачать руководство пользователя страница 44

Страница: 44 / 108

Features and functions

EJU34950

“SPEED” indicator light

The “SPEED” indicator light comes on when
the analog speedometer is selected.

The “SPEED” indicator light blinks three times
in the following instances:

●

The analog speedometer/tachometer is
switched to the speedometer function.

●

The display units of the multifunction meter
are switched to miles from kilometers.

●

Miles are selected as the display units when
the multifunction meter starts operating.

EJU34960

“RPM” indicator light

The “RPM” indicator light comes on when the
analog tachometer is selected.

EJU34980

“WARNING” indicator light

The “WARNING” indicator light blinks or
comes on, together with a warning indicator,
when a malfunction has occurred.

EJU35020

Left multifunction display and operation
buttons

The left multifunction display is equipped with
the following functions.

“SPEED” indicator light

“RPM” indicator light

“WARNING” indicator light

Fuel level meter

Fuel level warning indicator

Hour meter/voltmeter

Digital speedometer

Oil pressure warning indicator

Check engine warning indicator

Engine overheat warning indicator

UF1Y11E0.book Page 39 Wednesday, August 23, 2006 11:43 AM

Содержание VX WaveRunner 2007













































































































Результаты поиска

Содержание VX WaveRunner 2007

Отзывы:

Yamaha VX WaveRunner 2007, Руководство владельца/оператора, Страница: 44 / 108

Результаты поиска

Содержание VX WaveRunner 2007

Отзывы: