Yamaha VX WaveRunner 2007 Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 108

Yamaha VX WaveRunner 2007 Скачать руководство пользователя страница 39

Features and functions

34

otherwise the handlebars may suddenly
change position, which may lead to an
accident.

EJU31300

Shift lever

The shift lever is located on the starboard
(right) side of the watercraft and is used to
control the reverse gate, which allows the wa-
tercraft to move in reverse or forward.

When the shift lever is in the reverse position,
the watercraft can be launched from a trailer,
or backed up out of tight spots where you can-
not turn around easily.
To shift into reverse:
(1) Release the throttle lever and let the en-

gine speed return to idle.

(2) Pull the shift lever toward you.

WARNING

EWJ00030

●

Make sure that the throttle lever is com-
pletely released and that the engine is at
idle before shifting into reverse.

●

Do not use the reverse function to slow
down or stop the watercraft as it could
cause you to lose control, be ejected, or
impact the handlebars.

●

Use reverse for slow-speed maneuver-
ing only.

●

Make sure that there are no obstacles or
people behind you before shifting into
reverse.

●

Do not touch the reverse gate while the
shift lever is being operated, otherwise
you could be pinched.

To shift into forward:
(1) Release the throttle lever and let the en-

gine speed return to idle.

(2) Push the shift lever away from you.

EJU31320

Quick Shift Trim System (QSTS)
selector

The QSTS selector is located at the left han-
dlebar grip and is used to adjust the trim angle
of the watercraft.

Operating the QSTS selector changes the an-
gle of the jet thrust nozzle vertically. This
changes the trim angle of the watercraft.

1

Quick Shift Trim System (QSTS) selector

2

QSTS selector lock lever

UF1Y11E0.book Page 34 Wednesday, August 23, 2006 11:43 AM

«
...
37
38
39
40
41
...
»

Содержание VX WaveRunner 2007













































































































Отзывы:

Нет отзывов