PERIODIC MAINTENANCE AND MINOR REPAIR
I. E n g i n e o i l l e v e l c h e c k w i n d o w 1 . E n g i n e o i l f i l l e r c a p
2. Maximum level mark
3. Minimum level mark
To change the engine oil (with or
3 . Wait a few minutes until the oil set-
without oil filter cartridge replace-
tles, and then check the oil level
ment)
through the check window located
1. Start the engine, warm it up for
at the bottom-right side of the
several minutes, and then turn it
off.
crankcase.
2. Place an oil pan under the engine
N O T E :
The engine oil should be between the
minimum and maximum level marks.
to collect the used oil.
4. If the engine oil is below the mini-
mum level mark, add sufficient oil
of the recommended type to raise
it to the correct level.
E n g i n e o i l d r a i n b o l t
3. Remove the engine oil filler cap
and drain bolt to drain the oil from
the crankcase.
N O T E :
Skip steps 4-6 if the oil filter cartridge is
not being replaced.
6 - l 2
Содержание Vmax VMX12N
Страница 1: ......
Страница 10: ......
Страница 27: ...INSTRUMENT AND CONTROL FUNCTIONS Damping force Minimum soft 1 Standard 1 Maximum hard 4 3 14 ...