Yamaha Vmax VMX12N Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 93

background image

SAFETY INFORMATION

Loading

The total weight of the operator, passenger, accessories and cargo must not exceed the maximum

load limit of VMX12: 476 lb (216 kg) / VMX12C: 474 lb (215 kg). When loading within this weight limit,
keep the following in mind:
1. Cargo and accessory weight should be kept as low and close to the motorcycle as possible. Make

sure to distribute the weight as evenly as possible on both sides of the motorcycle to minimize imbal-

ance or instability.

2 . Shifting weights can create a sudden imbalance. Make sure that accessories and cargo are securely

attached to the motorcycle before riding. Check accessory mounts and cargo restraints frequently.

3. Never attach any large or heavy items to the handlebar, front fork, or front fender. These items, in-

cluding such items as sleeping bags, duffel bags, or tents, can create unstable handling or a slow
steering response.

Accessories

Genuine Yamaha accessories have been specifically designed for use on this motorcycle. Since
Yamaha cannot test all other accessories that may be available, you must personally be responsible
for the proper selection, installation and use of non-Yamaha accessories. Use extreme caution when
selecting and installing any accessories.

Keep the following guidelines in mind, as well as those provided under “Loading” when mounting
accessories.

1 . Never install accessories or carry cargo that would impair the performance of your motorcycle. Care-

fully inspect the accessory before using it to make sure that it does not in any way reduce ground
clearance or cornering clearance, limit suspension travel, steering travel or control operation, or ob-

scure lights or reflectors.

l-4

«
...
4
5
6
7
8
...
»

Содержание Vmax VMX12N






























































































Отзывы:

Нет отзывов

Похожие инструкции для Vmax VMX12N

F 850 GS Adventure 2019

Бренд: BMW Motorrad Страницы: 346

Бренд: A.J.S. Страницы: 104

Бренд: kellermann Страницы: 2

Outlander 6x6 450 XU+ 2022

Бренд: Can-Am Страницы: 226

R 1200 R Classic

Бренд: BMW Страницы: 1

Бренд: DYNATEK Страницы: 4

Бренд: Hudora Страницы: 8

Бренд: Datatool Страницы: 5

Бренд: Wunderlich Страницы: 6

TERMOSCUD R224X

Бренд: tucanourbano Страницы: 4

Бренд: APRILIA Страницы: 197

Бренд: Yamaha Страницы: 96

R15 YZF155 2018

Бренд: Yamaha Страницы: 94

Бренд: Yamaha Страницы: 108

Бренд: Yamaha Страницы: 112

Road Star XV16ALER

Бренд: Yamaha Страницы: 126

Бренд: Yamaha Страницы: 299

Prime R1-HD2-9813

Бренд: Rockford Fosgate Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды