Yamaha VK PROFESSIONAL-II 2016 Скачать руководство пользователя

Страница: 32 / 94

Control functions

WARNING

EWS00141

Do not use the rear carrier to lift the snow-
mobile. The snowmobile could fall, which
could result in severe injury or death.

To remove the passenger seat and backrest
1.

Open the rider seat. (See “Storage com-
partment” for details.)

Remove the passenger seat bolts, slide
the passenger seat and backrest slightly
rearward, and then lift them straight up to
remove them.

Install the passenger seat bolts, and then
tighten them to the specified torque.

NOTICE:

When using the rear storage

area, do not load any cargo that is too
large for it. In addition, cargo must not
project from the edges of the rear
storage area.

[ECS00212]

To install the passenger seat and backrest
1.

Open the rider seat. (See “Storage com-
partment” for details.)

Remove the passenger seat bolts, insert
the hooks on the bottom of the passen-
ger seat and backrest into the slots in the
rear storage area, and then slide the seat
and backrest forward.

NOTICE:

Make

sure that the wire harness is not
pinched when installing the passen-
ger seat and backrest.

[ECS00232]

Install the passenger seat bolts, and then
tighten them to the specified torque.

Maximum load limit:

Rear storage area:

5 kg (11 lbs)

Rear carrier:

20 kg (44 lbs)

1. Passenger seat bolt
2. Passenger seat and backrest

Passenger seat bolt tightening torque:

48 N·m (4.8 kgf·m, 35 lb·ft)

1. Passenger seat bolt

U8KWS1E0.book Page 24 Tuesday, May 17, 2016 1:49 PM

Содержание VK PROFESSIONAL-II 2016































































































Результаты поиска

Содержание VK PROFESSIONAL-II 2016

Отзывы:

Похожие инструкции для VK PROFESSIONAL-II 2016

Бренды по названию

Популярные бренды

Yamaha VK PROFESSIONAL-II 2016, Руководство пользователя

Результаты поиска

Содержание VK PROFESSIONAL-II 2016

Отзывы:

Похожие инструкции для VK PROFESSIONAL-II 2016

Бренды по названию

Популярные бренды