Yamaha VK PROFESSIONAL-II 2016 Скачать руководство пользователя

Страница: 71 / 94

Periodic maintenance and adjustment

NOTICE

ECS00561

Avoid scratching the skis when loading
and unloading the snowmobile, when rid-
ing in areas with little or no snow, or on
sharp edges such as concrete, curbs, etc.
This will wear or damage the skis.

To align the skis

Turn the handlebar so the skis face
straight ahead.

Check the following for ski alignment:



Skis are facing forward.



Ski toe-out (distance A – distance B) is
within specification.

TIP

Move the front tip of each ski fully inward be-
fore measuring or aligning.

If the alignment is not correct, consult a
Yamaha dealer.

ESU12165

Steering system

Check the handlebar for excessive free play.

To check the handlebar

Push the handlebar up and down and
back and forth.

Turn the handlebar slightly to the right
and left.

If excessive free play is felt, consult a Yamaha
dealer.

To adjust the handlebar height
1.

Remove the handlebar cover.

Loosen the handlebar bolts.

Ski runner wear limit:

8.0 mm (0.31 in)

Ski wear limit:

24.0 mm (0.94 in)

1. Distance A
2. Distance B

Ski toe-out (distance A – distance B):

0.0–15.0 mm (0.00–0.59 in)

1. Handlebar cover

U8KWS1E0.book Page 63 Tuesday, May 17, 2016 1:49 PM

Содержание VK PROFESSIONAL-II 2016































































































Результаты поиска

Содержание VK PROFESSIONAL-II 2016

Отзывы:

Похожие инструкции для VK PROFESSIONAL-II 2016

Бренды по названию

Популярные бренды

Yamaha VK PROFESSIONAL-II 2016, Руководство пользователя

Результаты поиска

Содержание VK PROFESSIONAL-II 2016

Отзывы:

Похожие инструкции для VK PROFESSIONAL-II 2016

Бренды по названию

Популярные бренды