manualshive.com logo in svg

Yamaha VK PROFESSIONAL-II 2016, Руководство пользователя

Yamaha VK PROFESSIONAL-II 2016 - мощный и надежный снегоход, предназначенный для профессионального использования. Для того чтобы узнать подробности о технической спецификации и руководстве пользователя, скачайте бесплатно "Owner's Manual" с manualshive.com. Узнайте все возможности этого удивительного снегохода прямо сейчас!

Поделиться
Скачать
background image

Operation

38

around the already weakened area. To mini-
mize possible damage, consult your stud
manufacturer for installation and stud pattern
recommendations.

Yamaha does not recommend track stud-
ding.

ESU11361

Strap

The strap should be used only by experi-
enced operators to assist them when tra-
verse (side-hill) riding.

WARNING

EWS00291

Improper use of the strap on the handle-
bar can result in severe injury or death.

Use the strap only as an operator grip
point when needed to shift weight uphill
to maintain balance during traverse
(side-hill) riding. Only experienced oper-
ators should traverse slopes steep
enough to require strap use.

Keep the right hand on the right handle-
bar grip for steering, and grip the strap
with the left hand to shift weight uphill
for balance during traverse riding.

Ride cautiously while using the strap. Do
not accelerate or decelerate abruptly
while holding onto the strap.

Do not use the strap to lift the snowmo-
bile.

Do not use the strap as a mounting point
for cargo or accessories.

ESU12577

Driving

WARNING

EWS00301

Be sure to read the “SAFETY INFORMA-
TION” section on page 8 and the “Riding
your snowmobile” section on page 33
carefully before operating the snowmo-
bile.

WARNING

EWS00632

Make sure that the throttle lever is fully
released and the snowmobile is at a full
stop before shifting.

Be sure to turn the shift lever to “D”, “R”
or “L” until it stops completely and only
while the engine is idling.

Do not exceed 80 km/h (50 mi/h) when
the shift lever is set to the “L” position.

Make sure that the area behind the
snowmobile is clear before reversing.
Watch behind.

Reduce speed and avoid sharp turning
when operating the snowmobile in re-
verse.

TIP

Make sure that the engine is warmed up be-
fore riding.

1.

While the engine is idling, select the de-
sired operating position (“D”, “R”, or “L”)
by pulling the shift lever out, turning it to
the position, and then releasing it.

NOTICE:

 Do not shift from forward to

reverse or from reverse to forward
while the snowmobile is moving, as
the drive train could be damaged.

[ECS00743]

1. Strap

1

U8KWS1E0.book  Page 38  Tuesday, May 17, 2016  1:49 PM

Содержание VK PROFESSIONAL-II 2016































































































Отзывы:

Нет отзывов

Похожие инструкции для VK PROFESSIONAL-II 2016

Бренды по названию

Популярные бренды

Загрузить еще бренды