manualshive.com logo in svg

Ski-Doo 1997 Tundra II LT 3266, Руководство пользователя


Поделиться
Скачать
background image

97-1

Page 1 of 10

No.

 97-1

Revision 1

Date : March 18, 1996

Litho’d in Canada (MBL-9702 GM)
®* Trademarks of Bombardier Inc.
All rights reserved © Bombardier Inc. 1996

Campaign no. 00000

YEAR

MODEL NAME

MODEL NUMBER

SERIAL NUMBER

1997

Tundra II LT

(Canada and United States)

3266

All

1997

Tundra II LT (Europe)

3267

All

This bulletin must be used in conjunction with the check list enclosed in Operator's Guide bag. Make sure
that predelivery check list is completed and signed.

◆

WARNING : To obtain warranty coverage, predelivery procedures must be performed by an
authorized Bombardier snowmobile dealer. Apply all necessary torques as indicated.

O

NOTE :

 The Information and components / system descriptions contained in this document are

correct at the time of publication. Bombardier Inc. however, maintains a policy of continuous

improvement of its products without imposing upon itself any obligation to install them on products
previously manufactured. Due to late changes, it may have some differences between the manufactured
product and the descriptions and / or specifications in this document. Bombardier Inc. reserves the right
at any time to discontinue or change specifications, designs, features, models or equipment without
incurring obligation.

The illustrations in this document show the typical construction of the different assemblies and may not
reproduce the full detail or exact shape of the parts. However, they represent parts that have the same or
similar function.

The content of this bulletin is designed as a guideline only. All mechanics performing predelivery
procedures should have attended the current model year service training. Further information or
inquires should be directed to your distributor service representative and / or specific 

Shop

Manual sections.

Please complete the Predelivery Check List for each snowmobile and return a customer signed
copy. Make sure the customer receives the 

Operator’s Guide, Safety Handbook and video.

SUBJECT : Predelivery Procedures

Содержание 1997 Tundra II LT 3266
























































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 1997 Tundra II LT 3266

Бренды по названию

Популярные бренды

Загрузить еще бренды