15
Parts and Functions
If you set this switch to “TRACK
DOWN,” audio signals output from
the USB terminal are sent back to the
USB terminal unmodified. This set-
ting is useful for tracking down mul-
tiple Wave files or audio signals from
SoftSynthesizer into a single Wave
file (page 39). In this case, the USB
LED lights up in orange and the
INPUT 1-3 jacks and DIGITAL IN jack
are disabled.
With some application pro-
grams, input audio signals
may be output unmodified. In
this case, do not set the INPUT
SELECT switch to “TRACK
DOWN.” Otherwise, audio sig-
nals may oscillate, causing
hearing loss or damage to the
playback device.
N
MIDI IN terminal
This jack receives MIDI signals from a
connected MIDI device. Use a MIDI
cable to connect the MIDI OUT ter-
minal of the MIDI device to this jack.
O
MIDI OUT terminal
This jack transmits MIDI signals to a
connected MIDI device. Use a MIDI
cable to connect the MIDI IN termi-
nal of the MIDI device to this jack.
P
TO TG terminal
Connect this terminal to the TO
HOST terminal on the MIDI devices.
Use an optional 8-pin system periph-
eral cable for Apple Macintosh for
connection.
Set the HOST SELECT
switch of the connected MIDI
device to “PC-1” or “Mac”,
regardless of the computer
you are using.
Q
USB terminal
Connect this terminal to a com-
puter’s USB terminal or a USB hub
using a USB cable.
■
Audio Signal Flow
NOTE
DIGITAL IN
INPUT1
(mono)
TRACK
DOWN
INPUT2
(mono)
INPUT3
AUX IN
USB
INPUT SELECT
DIGITAL
OUT
PHONES
OUTPUT
OUTPUT
DIGITAL
ANALOG
Gain switch
Gain switch
Volume
Volume
UW500.book Page 15 Monday, October 16, 2000 10:21 AM
