13
Parts and Functions
G
OUTPUT knob
This knob has two functions. It
switches the power on and off
(stand-by) each time a click sound is
heard when you turn the knob
When the power is on, the knob
enables you to adjust the UW500’s
overall volume. Note that the OUT-
PUT knob setting does not affect the
output at the DIGITAL OUT jack and
the input at the AUX IN jacks on the
rear panel.
Even when the power is off
(standby), a small current
flows through the unit. If you
plan not to use the UW500 for
a long period of time, be sure
to remove the power adaptor
from the AC outlet.
H
USB LED
The LED lights up in red when the
power is turned on to the UW500. It
lights up in green when the com-
puter is connected to the UW500
correctly. It flashes in green when the
UW500 transmits or receives MIDI
signal.
The LED lights up in orange if the
INPUT SELECT switch is set to
“TRACK DOWN” (page 15).
The LED flashes in orange if the sam-
pling frequency of the signal input at
the DIGITAL IN jack is not appropri-
ate. In this case, select the correct
frequency option in the application
on the computer according to the
sampling frequency of the input sig-
nal.
The LED flashes in red and green
alternately when the copyrighted
signal is input at the DIGITAL IN jack.
The signal cannot be recorded on
the computer (page 8).
UW500.book Page 13 Monday, October 16, 2000 10:21 AM
