26
■
External Control Settings
Just as described in the “External Control Settings”
section on page 24, these settings can be used to
control each of the UD-Stomp’s effect parameters
from the ASSIGNABLE CONTROL, a foot control-
ler connected to the EXP. PEDAL jack, or a MIDI
device connected to the MIDI IN jack.
●
External Control Operating Mode
After pressing the [UTILITY] button, use the [UP]/
[DOWN] buttons to select “
CtL
” in the display. Next
press the [STORE] button to enter the External Con-
trol Operation Mode.
Press the [BAND 1] button and use the [UP]/[DOWN]
buttons to select an Operating Mode for the exter-
nal control.
•
PrG
: The external control setting that is set in
the patch is available.
•
GLb
: The external control setting in the Utility
Mode is always available.
•
oFF
: The external control is always OFF.
The following five functions can be used when the
Operating Mode is set to “
GLb
”.
●
Set the External Control Number
Press the [BAND 2] button and use the [UP]/[DOWN]
buttons to set a control number (
1
-
8
).
* Refer to [External Control Settings] (page 24)
MIDI
IN
MIDI
OUT
MDF3, etc.
Press the [BAND 7] button and use the [UP]/[DOWN]
buttons to set the merge setting.
•
on
: Data is retransmitted via the MIDI OUT
jack
•
oFF
: Data is not retransmitted via the MIDI
OUT jack
* When the merge is on, data retransmitted via the MIDI OUT
jack is not confined to the MIDI Receive Channel setting so
all data from all channels will be transmitted.
●
MIDI Bulk Out
This operation transmits data stored in the UD-
Stomp’s USER AREA as well as Utility Mode set-
tings to an external device, such as the YAMAHA
MDF3, etc., for back up or storage.
Use a MIDI cable to connect the UD-Stomp’s MIDI
OUT jack to the MIDI IN jack of an external MIDI
device.
Utility Mode
●
About the MIDI Bulk In
This operation is used to return data stored in an
external MIDI device such as the YAMAHA MDF3,
etc., to the UD-Stomp.
Use a MIDI cable to connect the MIDI OUT jack on
the external MIDI device to the UD-Stomp’s MIDI
IN jack.
When Bulk Out data is sent from the external de-
vice, the UD-Stomp will receive the bulk data.
* Use the UD-Stomp’s Play Mode to receive MIDI Bulk In data.
When the MIDI Bulk In is carried out, the con-
tents of the patches in the USER AREA will
be rewritten.
Please make sure any important data is saved
before carrying out the MIDI Bulk In opera-
tion.
To send all USER AREA data (
011
-
933
) plus
Utility settings with the Bulk Out operation.
Press the [BAND 8] button (“
ALL
” will appear on
the display), then press the [STORE] button to carry
out the MIDI Bulk Out.
To send a single USER AREA patch (data) with
the Bulk Out operation.
After pressing the [CONNECT] button, select the
patch number you want to send with the bulk out.
Just as in selecting a patch number in the Play
Mode, use the [UP]/[DOWN] buttons or the foot
switches to select the patch.
After selecting a patch, press the [STORE] button
to carry out the MIDI Bulk Out operation with a single
patch.
* After transmitting the data the device will return to the previ-
ous condition, ready to select another patch number.
Содержание UD-Stomp
Страница 1: ......
Страница 32: ...Printed in Taiwan V839860 ...