Yamaha TZ250N1/(N), Руководство пользователя

Страница: 72 / 288

FRONT BRAKE PAD INSPECTION AND REPLACEMENT
3-19
2. Adjust:
• Brake pedal height
Pedal height adjustment steps:
• Loosen the locknut
1
.
• Turn the adjusting nut
2
until the pedal
height is within specified height.
• Tighten the locknut.
EC365050
FRONT BRAKE PAD INSPECTION AND
REPLACEMENT
1. Inspect:
• Brake pad thickness
a
Out of specification
≥
Replace as a set.
Brake pad thickness
a
:
Standard <Limit>
5.3 mm (0.21 in) 1.0 mm (0.04 in)
{
2. Replace:
• Brake pad
Brake pad replacement steps:
• Loosen the pad pin
1
and remove the
caliper
2
.
• Remove the cotter pin
3
, pad pin
4
, pad
support
5
and brake pads
6
.
• Connect the transparent hose
7
to the
bleed screw
8
and place the suitable con-
tainer under its end.
• Loosen the bleed screw and push the
caliper piston in.
CC CAUTION:
Do not reuse the drained brake fluid.
• Tighten the bleed screw.
Bleed screw:
6 Nm (0.6 m•kg, 4.3 ft•lb)
U
INSP
ADJ