Yamaha TTR 125 2023, Руководство пользователя

Страница: 76 / 90

Perio d ic maintenance an d a d justment
7-32
7
3. Turn the drive chain adjusting
plate on each side of the swing-
arm fully in direction (a).
4. Lift the rear wheel off the ground
according to the procedure on
page 7-30.
5. Remove the axle nut, and then pull
the wheel axle out.
6. Push the wheel forward, and then
remove the drive chain from the
rear sprocket.
TIP
The drive chain does not need to be
disassembled in order to remove and
install the wheel.
7. Remove the wheel.
To install the rear wheel
1. Insert the wheel axle from the left-
hand side.
TIP
Make sure that the drive chain adjust-
ing plates are installed with the
punched sides facing to the outside
and that the slot in the brake shoe plate
fits over the retainer on the swingarm.
2. Install the drive chain onto the rear
sprocket, and then adjust the
drive chain slack. (See page 7-22.)
3. Install the axle nut, and then lower
the rear wheel so that it is on the
ground.
4. Tighten the axle nut to the speci-
fied torque.
5. Install the brake rod onto the
brake camshaft lever, and then in-
stall the brake pedal free play ad-
justing nut onto the brake rod.
1. Brake pedal free play adjusting nut
2. Brake rod
1. Rear wheel
2. Drive chain
1
2
(a)
1. Slot
2. Retainer
Ti g htenin g torque:
Axle nut:
60 N·m (6.0 kgf·m, 44 lb·ft)
UBSR81E0.book Page 32 Monday, April 3, 2023 10:39 AM