Yamaha TTR 125 2023, Руководство пользователя

Страница: 53 / 90

Perio d ic maintenance an d a d justment
7-9
7
d own sufficiently b efore remov-
in g the oil filler cap.
[EWA17640]
NOTICE:
Do not operate the ve-
hicle until you know that the en-
g ine oil level is sufficient.
[ECA10012]
TIP
The engine oil should be between the
minimum and maximum level marks.
4. If the engine oil is at or below the
minimum level mark, add suffi-
cient oil of the recommended type
to raise it to the correct level.
5. Check the O-ring for damage, and
replace it if necessary.
6. Insert the dipstick into the oil filler
hole, and then tighten the oil filler
cap.
To chan g e the en g ine oil
1. Start the engine, warm it up for
several minutes, and then turn it
off.
2. Place an oil pan under the engine
to collect the used oil.
3. Remove the engine oil filler cap
and engine oil drain bolt and its
gasket to drain the oil from the
crankcase.
4. Install the drain bolt and its new
gasket, and then tighten the bolt
to the specified torque.
5. Refill with the specified amount of
the recommended engine oil.
1. Engine oil filler cap
1. Maximum level mark
2. Minimum level mark
1. Engine oil drain bolt
Ti g htenin g torque:
Engine oil drain bolt:
20 N·m (2.0 kgf·m, 15 lb·ft)
Recommen d e d en g ine oil:
See page 9-1.
Oil chan g e quantity:
1.00 L (1.06 US qt, 0.88 Imp.qt)
UBSR81E0.book Page 9 Monday, April 3, 2023 10:39 AM