Yamaha TTR 125 2023, Руководство пользователя

Страница: 35 / 90

Instrument an d control functions
4-10
4
3. Tighten the locknut to the speci-
fied torque.
NOTICE:
Always
ti g hten the locknut a g ainst the
a d justin g nut, an d then ti g hten
the locknut to the specifie d
torque.
[ECA11242]
Re b oun d d ampin g force
Turn the adjusting dial in direction (a) to
increase the rebound damping force.
Turn the adjusting dial in direction (b) to
decrease the rebound damping force.
To set the rebound damping force, turn
the adjusting dial in direction (a) until it
stops, and then count the clicks in di-
rection (b).
TIP

When turning the damping force
adjusting dial in direction (a), the 0
click position and the 1 click posi-
tion may be the same.

When turning the damping force
adjusting dial in direction (b), it
may click beyond the stated spec-
ifications, however such adjust-
ments are ineffective and may
damage the suspension.
Compression d ampin g force
Turn the adjusting screw in direction (a)
to increase the compression damping
force.
Turn the adjusting screw in direction (b)
to decrease the compression damping
force.
To set the compression damping
force, turn the adjusting screw in direc-
tion (a) until it stops, and then count the
clicks in direction (b).
Ti g htenin g torque:
Locknut:
42 N·m (4.2 kgf·m, 31 lb·ft)
1. Rebound damping force adjusting dial
Re b oun d d ampin g settin g :
Minimum (soft):
20 click(s) in direction (b)
Standard:
12 click(s) in direction (b)
Maximum (hard):
0 click(s) in direction (b)
1. Compression damping force adjusting
screw
UBSR81E0.book Page 10 Monday, April 3, 2023 10:39 AM