Yamaha TT-R50E 2020, Руководство пользователя

Страница: 61 / 82

Perio d ic maintenance an d a d justment
7-29
7
5. Remove the blown fuse, and then
install a new fuse of the specified
amperage.
WARNING! Do not
use a fuse of a hi g her ampera g e
ratin g than recommen d e d to
avoi d causin g extensive d am-
a g e to the electrical system an d
possi b ly a fire.
[EWA15132]
6. Connect the battery coupler.
7. Install the battery cover by install-
ing the bolts.
8. Install the seat.
9. Turn the main switch to the on po-
sition.
10. Start the engine.
11. If the fuse immediately blows
again, check for a loose connec-
tion and repair. If none found,
have your Yamaha dealer check
the vehicle.
EAU75190
Supportin g the motorcycle
Since this model is not equipped with a
centerstand, use a maintenance stand
when removing the front or rear wheel,
adjusting the chain or washing the ve-
hicle, etc.
Check that the motorcycle is in a stable
and level position before starting any
maintenance.
TIP
If a suitable maintenance stand is not
available, a strong wooden box can be
used instead.
1. Battery coupler
Specifie d fuse:
10.0 A
1
1. Maintenance stand (for off-road motorcycle)
1
UBEG10E0.book Page 29 Friday, May 24, 2019 6:30 PM