Perio
d
ic maintenance an
d
a
d
justment
7-30
7
EAU24361
Front wheel
EAU56365
To remove the front wheel
1. Loosen the axle nut.
2. Place the motorcycle on a mainte-
nance stand.
WARNING! To
avoi
d
injury, securely support
the vehicle so there is no
d
an
g
er
of it fallin
g
over.
[EWA10752]
3. Disconnect the brake cable at the
wheel by removing the brake lever
free play adjusting nut at the brake
camshaft lever, then remove the
cable from the brake camshaft le-
ver.
4. Remove the axle nut and washer.
5. Pull the wheel axle out, and then
remove the wheel.
To install the front wheel
1. Lift the wheel up between the fork
legs.
2. Insert the wheel axle from the right
side.
TIP
Make sure that the slot in the brake
shoe plate fits over the retainer on the
fork leg.
3. Install the washer and axle nut.
4. Take the motorcycle off the main-
tenance stand and put the side-
stand down.
5. Tighten the axle nut to the speci-
fied torque.
1. Axle nut
2. Washer
1. Brake cable
2. Brake camshaft lever
3. Brake lever free play adjusting nut
2
1
1
3
2
1. Wheel axle
1. Slot
2. Retainer
1
1
2
UBEG10E0.book Page 30 Friday, May 24, 2019 6:30 PM
Содержание TT-R50E 2020
Страница 82: ...DIC183 PRINTED IN CHINA 2019 06...