Perio
d
ic maintenance an
d
a
d
justment
7-23
7
chain, turn the adjusting plate on
each side of the swingarm in di-
rection (b), and then push the rear
wheel forward.
TIP
Make sure that both adjusting plates
are in the same position for proper
wheel alignment.
4. Tighten the axle nut to the speci-
fied torque.
5. Adjust the brake pedal free play.
6. Make sure that the drive chain
pullers are in the same position,
the drive chain slack is correct,
and the drive chain moves
smoothly.
EAU23026
Cleanin
g
an
d
lu
b
ricatin
g
the
d
rive chain
The drive chain must be cleaned and
lubricated at the intervals specified in
the periodic maintenance and lubrica-
tion chart, otherwise it will quickly wear
out, especially when riding in dusty or
wet areas. Service the drive chain as
follows.
NOTICE
ECA10584
The
d
rive chain must
b
e lu
b
ricate
d
after washin
g
the motorcycle, ri
d
in
g
in the rain or ri
d
in
g
in wet areas.
1. Clean the drive chain with kero-
sene and a small soft brush.
NOTICE:
To prevent
d
ama
g
in
g
the O-rin
g
s,
d
o not clean the
d
rive chain with steam cleaners,
hi
g
h-pressure washers or inap-
propriate solvents.
[ECA11122]
2. Wipe the drive chain dry.
3. Thoroughly lubricate the drive
chain with a special O-ring chain
lubricant.
NOTICE:
Do not use
en
g
ine oil or any other lu
b
ri-
cants for the
d
rive chain, as they
1. Adjusting nut
2. Adjusting plate
3. Axle nut
Ti
g
htenin
g
torque:
Axle nut:
80 N·m (8.0 kgf·m, 59 lb·ft)
UB6816E0.book Page 23 Thursday, April 2, 2020 9:26 AM
Содержание TT-R230 2020
Страница 1: ...PRINTED IN BRAZIL 2020 04 JC E TT R230 B68 F8199 16 LIT 11626 34 47 ...
Страница 9: ...Location of important labels 1 2 1 UB6816E0 book Page 2 Thursday April 2 2020 9 26 AM ...
Страница 25: ...Instrument and control functions 4 9 4 UB6816E0 book Page 9 Thursday April 2 2020 9 26 AM ...
Страница 80: ...PRINTED IN BRAZIL 2020 04 JC E TT R230 B68 F8199 16 LIT 11626 34 47 ...