Yamaha TT-R230 2020, Руководство пользователя

Страница: 38 / 80

Perio d ic maintenance an d a d justment
7-7
7
Before installing a spark plug, the
spark plug gap should be measured
with a wire thickness gauge and, if
necessary, adjusted to specification.
Clean the surface of the spark plug
gasket and its mating surface, and
then wipe off any grime from the spark
plug threads.
TIP
If a torque wrench is not available
when installing a spark plug, a good
estimate of the correct torque is 1/4–
1/2 turn past finger tight. However, the
spark plug should be tightened to the
specified torque as soon as possible.
EAUW0615
En g ine oil
The oil level should be checked regu-
larly. In addition, the oil must be
changed and the filter element cleaned
at the intervals specified in the periodic
maintenance chart.
NOTICE
ECA11621

In or d er to prevent clutch slip-
pa g e (since the en g ine oil also
lu b ricates the clutch), d o not
mix any chemical a dd itives. Do
not use oils with a d iesel speci-
fication of “CD” or oils of a hi g h-
er quality than specifie d . In
a dd ition, d o not use oils la b ele d
“ENERGY CONSERVING II” or
hi
g her.

Make sure that no forei g n mate-
rial enters the crankcase.
1. Spark plug gap
Spark plu g g ap:
0.6–0.7 mm (0.024–0.028 in)
Ti g htenin g torque:
Spark plug:
18 N·m (1.8 kgf·m, 13 lb·ft)
Recommen d e d oil:
See page 9-1.
Oil quantity:
Oil change:
1.00 L (1.06 US qt, 0.88 Imp.qt)
With oil filter removal:
1.10 L (1.16 US qt, 0.97 Imp.qt)
UB6816E0.book Page 7 Thursday, April 2, 2020 9:26 AM