Yamaha TSX-N237 страница 52 Скачать руководство пользователя

Страница: 52 / 59

Troubleshooting

USB flash drive

DAB reception (Australia, U.K., and Europe models only)

Problem

Cause

Solution

The unit does not detect the USB flash drive.

The USB flash drive is not connected to the USB jack securely.

Turn off the unit, reconnect the USB flash drive, and turn the unit
on again (

p. 20).

A USB flash drive in a format other than FAT16/32 format is used.

Use a USB flash drive with FAT16 or FAT32 format.

Folders and files in the USB flash drive cannot be
viewed.

The data in the USB flash drive is protected by encryption.

Use a USB flash drive without an encryption function.

Playback does not begin, or playback stops at
the beginning.

The music file is not supported by the unit.

Confirm the file formats that are supported by the unit (

p. 56).

Problem

Cause

Solution

Cannot tune in to any DAB stations.

The initial scan operations were not performed.

Perform the initial scan operations (

p. 15).

The initial scan operations are not successful and
Not Found is displayed.

DAB signals are too weak.

Use Tuning Aid to check reception strength, adjust the height or
direction of the antenna, or move the unit (

p. 17).

The antenna is not suitably positioned for receiving DAB stations.

There is no DAB coverage in your area.

Check with your dealer or WorldDMB online at
http://www.worlddab.org for a listing of the DAB coverage in your
area.

There is noise interference (e.g. hiss, crackle or
jitter).

The antenna is not suitably positioned for receiving DAB stations.

Adjust the height or direction of the antenna.

DAB signals are too weak.

Use Tuning Aid to check reception strength, adjust the height or
direction of the antenna, or move the unit (

p. 17).

The DAB station information is not shown or is
inaccurate.

The DAB station may be temporarily out of service, or the DAB
station information is not provided by the DAB broadcaster.

Contact the DAB broadcaster.

Содержание TSX-N237




























































Результаты поиска

Содержание TSX-N237

Отзывы:

Похожие инструкции для TSX-N237

Бренды по названию

Популярные бренды

Yamaha TSX-N237, Руководство пользователя

Результаты поиска

Содержание TSX-N237

Отзывы:

Похожие инструкции для TSX-N237

Бренды по названию

Популярные бренды