Yamaha TDM850 1999, Руководство по обслуживанию

Страница: 30 / 43

–24–
INSTRUMENT FUNCTIONS
ELEC
INSTRUMENT FUNCTIONS
COMBINATION METER
Speedometer
Clock, odometer
Select button
Reset button
1
2
3
4
NOTE:
This combination meter is equipped with the fol-
lowing.
An odometer
Two trip odometers
A clock
Odometer and trip meters
Use the trip meters to estimate how far you can
ride on a tank of fuel.
Push the Select button to change between the
odometer mode “ODO” and the trip odometer
modes “TRIP 1” and “TRIP 2” in the following or-
der:
“ODO”
“TRIP 1” “TRIP 2” “ODO”
To reset a trip odometer to 0.0, select it by pushing
the select button and push the reset button for at
least one second.
Clock
To change the display to the clock mode, push
both the select and reset buttons.
To set the clock:
1. Push both the select and reset buttons for at
least two seconds.
2. When the hour digits start flashing, push the re-
set button to set the hours.
3. Push the select button to change the minutes.
4. When the minute digits start flashing, push the
reset button to set the minutes.
5. Push the select button to start the clock.
After setting the clock, be sure to push the select
button before turning the main switch to “OFF”,
otherwise the clock will not be set.