Yamaha Star XV250G 2015, Руководство пользователя

Страница: 74 / 88

Perio d ic maintenance an d a d justment
7-38
7
6. Tighten the brake torque rod nut
to the specified torque.
7. Adjust the drive chain slack. (See
page 7-23.)
8. Tighten the locknuts, and then
tighten the axle nut to the speci-
fied torques.
9. Adjust the brake pedal free play.
(See page 7-19.)
WARNING
EWA10661
After a d justin g the b rake pe d al free
play, check the operation of the
b rake li g ht.
EAU25852
Trou b leshootin g
Although Yamaha motorcycles receive
a thorough inspection before shipment
from the factory, trouble may occur
during operation. Any problem in the
fuel, compression, or ignition systems,
for example, can cause poor starting
and loss of power.
The following troubleshooting chart
represents a quick and easy procedure
for checking these vital systems your-
self. However, should your motorcycle
require any repair, take it to a Yamaha
dealer, whose skilled technicians have
the necessary tools, experience, and
know-how to service the motorcycle
properly.
Use only genuine Yamaha replace-
ment parts. Imitation parts may look
like Yamaha parts, but they are often
inferior, have a shorter service life and
can lead to expensive repair bills.
WARNING
EWA15142
When checkin g the fuel system, d o
not smoke, an d make sure there are
no open flames or sparks in the ar-
ea, inclu
d in g pilot li g hts from water
heaters or furnaces. Gasoline or
g asoline vapors can i g nite or ex-
plo d e, causin g severe injury or prop-
erty d ama g e.
Ti g htenin g torque:
Brake torque rod nut:
23 Nm (2.3 m·kgf, 17 ft·lbf)
Ti g htenin g torques:
Drive chain puller locknut:
16 Nm (1.6 m·kgf, 12 ft·lbf)
Axle nut:
105 Nm (10.5 m·kgf, 76 ft·lbf)
U1BE26E0.book Page 38 Thursday, June 25, 2015 9:38 AM