![background image](http://html.mh-extra.com/html/yamaha/sound-editor-ver-2-10/sound-editor-ver-2-10_effect-list_903214032.webp)
32
Bass Preamp
Pre-amplifier designed for use with bass guitars.
Parameter
Display
Range
Description
Sound Type
TYPE
FLAT, TUBE, SOLID, R&B,
VINTAGE, MODERN, CLASSIC,
HEAVY, DRIVE, DIST, FUZZ
Basic pre-amplifier sound types
Gain
GAIN
0.0 to 10.0
Adjusts the amount of distortion
Master
MSTR
0.0 to 10.0
Adjusts the volume
Bass
BASS
-15.0 to 15.0 dB
Adjusts level of low frequencies
Low Middle
LMID
-15.0 to 15.0 dB
Adjusts level of lower mid frequencies
Middle
MID
-15.0 to 15.0 dB
Adjusts level of mid frequencies
High Middle
HMID
-15.0 to 15.0 dB
Adjusts level of upper mid frequencies
Treble
TRE
-15.0 to 15.0 dB
Adjusts level of high range frequencies
Bass Freq.
BASF
20.0 Hz to 320 Hz
Bass EQ (peaking type) frequency
Low Mid Freq.
LMDF
80.0 Hz to 1.28 kHz
Low Mid EQ (peaking type) frequency
Middle Freq.
MIDF
250 Hz to 4.00 kHz
Middle EQ (peaking type) frequency
High Mid Freq.
HMDF
500 Hz to 8.00 kHz
High Mid EQ (peaking type) frequency
Treble Freq.
TREF
1.25 kHz to 20.0 kHz
Treble EQ cutoff frequency
Parametric EQ
Freq.
PEQF
20.0 Hz to 20.0 kHz
Parametric EQ frequency
Parametric EQ Q
PEQQ
0.100 to 20.0
Parametric EQ bandwidth
Parametric EQ
Gain
PEQG
-15.0 to 15.0 dB
Parametric EQ gain
Gate
NGAT
OFF, -53.0 to 0 dB
Level at which the noise gate activates
SP SIM SW
SPSW
Off, R On, LR On
Speaker Simulator ON/OFF. (OFF: Inactive. R On: Only activated on the
right channel. LR On: Active on both channels.)
Output Limiter
OLIM
OFF, ON
Output Limiter ON/OFF
Comp. Ratio
CRAT
1:1 to
∞
:1
Compression ratio. Automatically adjusts the output level according to
the Comp. Gain setting.
Comp. Threshold
CTHR
-54 to 0 dB
Level at which compressor activates
Comp. Attack
CATT
0 to 120 ms
Time required for compressor to peak after exceeding threshold
Comp. Release
CREL
6 to 11500 ms
Time required for compressor to terminate after going below threshold
Comp. Gain
CGAI
0.0 to 18.0 dB
Compressor’s output gain when the COMP. Ratio is set to
∞
:1.
If set so that the volume level stays the same when the Comp. Ratio is
1:1 and
∞
:1, it is possible to adjust the amount of compression and
keep the volume level stable.
This parameter is not effective when the Comp. Ratio is set to 1:1.
Comp. Knee
CKNE
Hard, 1 to 5
Adjusts the width of the gain curve just above the threshold
Содержание Sound Editor ver. 2.10
Страница 1: ...1 EFFECT LIST ver 2 10 ...