![background image](http://html.mh-extra.com/html/yamaha/sound-editor-ver-2-10/sound-editor-ver-2-10_effect-list_903214015.webp)
15
Short + Long Mod. Delay
3 band multi tap delay w/3 delay times.
*n = delay band no.
Reverb
Hall, room, stage, and plate reverb simulations, all with gates.
Parameter
Display
Range
Description
Wave Form
W.F.
Triangle, Saw Up, Saw Down
Selects the modulation waveform used for “other” in the Wave Parame-
ter below.
Effect Level
ELVL
0.0 to 10.0
Effect level
Direct Level
DLVL
0.0 to 10.0
Level of direct sound
Direct Pan
DPAN
L10.0 to R10.0
Pan for direct sound
* Edit window no. corresponds to delay band no. and tap no.
Page1:Band1 Tap1, Page2:Band2 Tap1, Page3:Band2 Tap2, Page4:Band2 Tap3,
Page5:Band3 Tap1, Page6:Band3 Tap2, Page7:Band3 Tap3, Page8:Band3 Tap4
Time
DTn
Band1:0.1 to 696.0 ms,
Band2:0.2 to 2180.0 ms,
Band3:0.2 to 2920.0 ms
Delay time (Page1, Page2, Page5 only)
Low Cut Filter
LCFn
Off to 10.0
Filter cuts low frequencies (Page1, Page2, Page5 only)
High Cut Filter
HCFn
Off to 10.0
Filter cuts high frequencies (Page1, Page2, Page5 only)
Feedback
FBn
0.0 to 10.0
Delay’s feedback level (Page1, Page2, Page5 only)
Wave
WAVn
Sine, Other
Modulation waveform. Sine wave or other (“other” is the wave selected
in the Wave Form Parameter above).
Phase
PHSn
Normal, Reverse
Phase of the delay
Tap
TAPn
0 to 100 %
The output time of the delay sound in regard to the time of the delay
loop (see
)
Speed
SPDn
0.0 to 10.0
Modulation speed (modulation phase if the band is synchronized with
another band)
Depth
DPTn
0.0 to 10.0
Modulation depth
Pan
PANn
L10.0 to R10.0
Position in the stereo field of the delay sound.
Level
LVLn
0.0 to 10.0
Delay level
Sync
SYNn
1 to 8
Setting to synchronize the modulation of different bands (set to any
number other than the band number of the current band, it will syn-
chronize with that band. If set to the same number as the current band,
it will not synchronize.)
Parameter
Display
Range
Description
Reverb Type
TYPE
Hall, Room, Stage, Plate
Reverb type
Initial Delay
IDLY
0.0 to 500.0 ms
Initial delay before reverb begins
ER/Rev Delay
ERDL
0.0 to 100.0 ms
Delay between early reflections and reverb
Reverb Time
TIME
0.3 to 99.0 s
Reverb time
High Ratio
HRAT
0.1 to 1.0
High-frequency reverb time ratio
Low Ratio
LRAT
0.1 to 2.4
Low-frequency reverb time ratio
Diffusion
DIFF
0 to 10
Reverb diffusion (left–right reverb spread)
Density
DNST
0 to 100%
Reverb density
ER/Rev Balance
ERBL
0 to 100%
Balance of early reflections and reverb
(0% = all reverb, 100% = all early reflections)
High Pass Filter
HPF
Thru, 21.2 Hz to 8.00 kHz
High-pass filter cutoff frequency
Low Pass Filter
LPF
50.0 Hz to 16.0 kHz, Thru
Low-pass filter cutoff frequency
Gate Level
GATE
Off, –60 to 0 dB
Level at which gate kicks in
Attack
ATCK
0 to 120 ms
Gate opening speed
Hold
HOLD
0.02 to 2040 ms
Gate open time
Decay
DCAY
6 to 44500 ms
Gate closing speed
Mix
MIX
0 to 100%
Mix level
Содержание Sound Editor ver. 2.10
Страница 1: ...1 EFFECT LIST ver 2 10 ...