![background image](http://html.mh-extra.com/html/yamaha/sound-editor-ver-2-10/sound-editor-ver-2-10_effect-list_903214009.webp)
9
M.Band Dyna.
3-band dynamics processor, with individual solo and gain reduction metering for each band.
Dyna. Filter
Filter effect. The effect changes according to input level.
Dyna. Flange
Flanger effect. The effect changes according to input level.
Parameter
Display
Range
Description
Slope
SLOP
–6, –12 dB
Filter slope
Low Gain
LO.G
–96.0 to +12.0 dB
Low band level
Mid Gain
MI.G
–96.0 to +12.0 dB
Mid band level
High Gain
HI.G
–96.0 to +12.0 dB
High band level
Lookup
LKUP
0.0 to 100.0 ms
Lookup delay
Ceiling
CEIL
–6.0 to 0.0 dB, Off
Specifies the maximum output level
L–M Xover
L-MX
21.2 Hz to 8.00 kHz
Low/mid crossover frequency
M–H Xover
M-HX
21.2 Hz to 8.00 kHz
Mid/high crossover frequency
Presence
PRE
–10 to +10
For positive values, the threshold of the high band is lowered and the
threshold of the low band is increased. For negative values, the oppo-
site will occur. When set to 0, all three bands are affected the same.
Comp. Bypass
COMP
Off, On
Compressor bypass
Comp. Threshold
CMPT
–24.0 to 0.0 dB
Compressor threshold
Comp. Ratio
CRAT
1:1 to 20:1
Compressor ratio
Comp. Attack
CATA
0 to 120 ms
Compressor attack
Comp. Release
CREL
6 to 11500 ms
Compressor release time
Comp. Knee
CKNE
0 to 5
Adjusts the width of the gain curve just above the compressor‘s thresh-
old
Exp. Bypass
EXP
Off, On
Expander bypass
Exp. Threshold
EXPT
–54.0 to –24.0 dB
Expander threshold
Exp. Ratio
ERAT
1:1 to
∞
:1
Expander ratio
Exp. Release
EREL
6 to 11500 ms
Expander release time
Lim. Bypass
LIM
Off, On
Limiter bypass
Lim. Threshold
LIMT
–12.0 to 0.0 dB
Limiter threshold
Lim. Attack
LATA
0 to 120 ms
Limiter attack
Lim. Release
LREL
6 to 11500 ms
Limiter release time
Lim. Knee
LKNE
0 to 5
Adjusts the width of the gain curve just above the limiter‘s threshold
Parameter
Display
Range
Description
Type
TYPE
Low Pass Filter, High Pass Filter,
Band Pass Filter
Filter type
Decay
DCY
6 to 46000 ms
Filter frequency change decay speed
Direction
DIR
Up, Down
Upward or downward frequency change
Sense
SENS
0 to 100
Sensitivity
Offset
OFST
0 to 100
Filter frequency offset
Resonance
RESO
0 to 20
Filter resonance
Level
LVL
0 to 100
Output level
Mix
MIX
0 to 100%
Mix level
Parameter
Display
Range
Description
Decay
DCY
6 to 46000 ms
Decay speed
FB. Gain
FB
–99 to +99%
Feedback gain (plus values for normal-phase feedback, minus values for
reverse-phase feedback)
Direction
DIR
Up, Down
Upward or downward frequency change
Sense
SENS
0 to 100
Sensitivity
Offset
OFST
0 to 100
Delay time offset
LSH Freq.
LSHF
21.2 Hz to 8.00 kHz
Low shelving filter frequency
LSH Gain
LSHG
–12.0 to +12.0 dB
Low shelving filter gain
EQ Freq.
EQ.F
100 Hz to 8.00 kHz
EQ (peaking type) frequency
EQ Gain
EQ.G
–12.0 to +12.0 dB
EQ (peaking type) gain
EQ Q
EQ.Q
10.0 to 0.10
EQ (peaking type) bandwidth
HSH Freq.
HSHF
50.0 Hz to 16.0 kHz
High shelving filter frequency
HSH Gain
HSHG
–12.0 to +12.0 dB
High shelving filter gain
Mix
MIX
0 to 100%
Mix level
Содержание Sound Editor ver. 2.10
Страница 1: ...1 EFFECT LIST ver 2 10 ...