Yamaha Sirius T110LE, Руководство по обслуживанию

Страница: 132 / 308

4-33
ENG
CYLINDER AND PISTON
EAS00255
CHECKING THE CYLINDER AND
PISTON
1. Check:
9
piston wall
9
cylinder wall
Vertical scratches
→
Rebore or replace the
cylinder, and replace the piston and piston
rings as a set.
2. Measure:
9
piston-to-cylinder clearance
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Measure cylinder bore “C” with the cylinder
bore gauge.
NOTE:
Measure cylinder bore “C” by taking side-to-side
and front-to-back measurements of the cylinder.
Then, find the average of the measurements.
b. If out of specification, rebore or replace the
cylinder, and replace the piston and piston
rings as a set.
c. Measure piston skirt diameter “P” with a
micrometer.
a
5 mm from the bottom edge of the piston
d. If out of specification, replace the piston and
piston rings as a set.
e. Calculate the piston-to-cylinder clearance
with the following formula.
Cylinder bore “C”
51.000 – 51.015 mm
(2.0079 – 2.0085 in)
Limit 51.1 mm (2.03 in)
Taper limit “T” 0.05 mm (0.002 in)
Out-of-round “R” 0.05 mm (0.002 in)
“C” = maximum of D
1
– D
2
“T” = maximum of D
1
or D
2
– maximum of
D
5
or D
6
“R” = maximum of D
1
, D
3
or D
5
– minimum
of D
2
, D
4
or D
6
Piston size “P”
Standard
50.977 – 50.992 mm
(2.0070 – 2.0076 in)
3S3-F8197-E0_4_1 05.11.18 13:15 Page 33