FIT RUBBER SEAL
BEFORE FIRST USE!
6
7
2. Both Rubber seal must be fitted as shown and
fully lubricated with the supplied grease
EVERYTIME before replacing th nose cone.
Sealing
Surface
O-ring Seals
STEP 3
Fig.2C
Fit two seals in
the grooves.
STEP 2
Fig.2b
FIT RUBBER SEAL
BEFORE FIRST USE!
1. Unlock four latches and remove Nose Cone.
STEP 1
Fig.2a
CRUSHING HAZARD:
The following action during assembly, disassembly, and
transportation of the seascooter may incur crushing hazards
to your fingers or toes:
-Closing the nose cone latches
-Putting on the nose cone housing
-Placing the battery into the seascooter
-Accidental dropping of the seascooter or battery.
Silicone
Grease
Vent O Ring
