Yamaha S03 voice editor, Руководство пользователя

Страница: 49 / 112

49
Basics Section
3
Set the Common
Parameters
Each Voice consists of up to four Elements. Here, the
parameters common to all Elements are explained.
●
GENERAL (Common General)
In PAGES 1 to 4, you can set the Voice Name, Voice
output settings and other general parameters.
●
CONTROLLER (Common Controller)
In PAGES 5 to 10, you can assign and set various
functions for the controllers on the front (such as
the Modulation and Pitch Bend Wheels) and the
controllers connectable to the rear panel. For
example, you can assign parameters to the
Modulation Wheel so that you can change the tone
of Voice in real time. For details about different
controller uses, see page 45.
●
EFFECT (Common Effect)
In PAGES 11 to 17, you can set the Effects
parameters for the Voice. There are System Effects
(Reverb and Chorus) and Variation Effects.
4
Set the Element
Parameters
●
OSC/MIX (Oscillator/Mix)
In PAGES 1 to 6, you can set the various parameters
controlling the waveforms on which the Voice is
based. You can select the Wave used for the
Element, the volume and note range of each
Element and so on.
Element Sw (Element Switch)
Determines whether each Element sounds or not.
Wave Selection
Select the Wave for each Element.
Level
Pan
Set the volume (output level) and stereo pan
position of each Element.
KEY ELEM PART
OCTAVE
PAGE
1 E
KEY ELEM PART
OCTAVE
PAGE
4 E
GrandPno
XG001
VelSnsDpt
064
1~4
KEY ELEM PART
OCTAVE
PAGE
5 E
KEY ELEM PART
OCTAVE
PAGE
10 E
Porta Sw
off
AC1 FMod
000
5~10
KEY ELEM PART
OCTAVE
PAGE
11 E
KEY ELEM PART
OCTAVE
PAGE
17 E
ReverbSend
040
AC1VerCtl
+00
11~17
KEY ELEM PART
OCTAVE
PAGE
1 E
KEY ELEM PART
OCTAVE
PAGE
4 E
KEY ELEM PART
OCTAVE
PAGE
2 E
KEY ELEM PART
OCTAVE
PAGE
5 E
KEY ELEM PART
OCTAVE
PAGE
3 E
KEY ELEM PART
OCTAVE
PAGE
6 E
Element Sw
on
Pan
C
PianoL@
W*001
NtLmt-L
C-2
Level
100
VelLmt-L
001