manualshive.com logo in svg

Yamaha S03 voice editor, Руководство пользователя

Yamaha S03 Voice Editor - программа для редактирования голосов на синтезаторе Yamaha S03. Владельцы могут скачать бесплатно Руководство пользователя на manualshive.com. Используйте ключевые слова "Owner's Manual", "manual", "download", "free" для скачивания. Улучшите ваш опыт работы с Yamaha S03!

Поделиться
Скачать
background image

NEDERLAND / THE NETHERLANDS

• Dit apparaat bevat een lithium batterij voor geheugen back-up.

• This apparatus contains a lithium battery for memory back-up.

• Raadpleeg uw leverancier over de verwijdering van de batterij op het 

moment dat u het apparaat ann het einde van de levensduur afdankt of 
de volgende Yamaha Service Afdeiing:

Yamaha Music Nederland Service Afdeiing
Kanaalweg 18-G, 3526 KL UTRECHT
Tel. 030-2828425

• For the removal of the battery at the moment of the disposal at the end of 

the service life please consult your retailer or Yamaha Service Center as 
follows:

Yamaha Music Nederland Service Center
Address

: Kanaalweg 18-G, 3526 KL UTRECHT

Tel

: 030-2828425

• Gooi de batterij niet weg, maar lever hem in als KCA.

• Do not throw away the battery. Instead, hand it in as small chemical 

waste.

(lithium disposal)

ADVARSEL!

Lithiumbatteri—Eksplosionsfare ved fejlagtig håndtering. Udskiftning må 
kun ske med batteri af samme fabrikat og type.  Levér det brugte batteri 
tilbage til leverandoren.

VARNING

Explosionsfara vid felaktigt batteribyte. Använd samma batterityp eller en 
ekvivalent typ som rekommenderas av apparattillverkaren. Kassera använt 
batteri enligt fabrikantens instruktion.

VAROITUS

Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo 
ainoastaan laitevalmistajan suosittelemaan tyyppiin. Hävitä käytetty paristo 
valmistajan ohjeiden mukaisesti.

(lithium caution)

FCC INFORMATION (U.S.A.)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions contained in 
this manual, meets FCC requirements. Modifications not expressly 
approved by Yamaha may void your authority, granted by the FCC, to use 
the product.

2. IMPORTANT: 

When connecting this product to accessories and/or another product use 
only high quality shielded cables. Cable/s supplied with this product MUST 
be used. Follow all installation instructions. Failure to follow instructions 
could void your FCC authorization to use this product in the USA.

3. NOTE: 

This product has been tested and found to comply with the requirements 
listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance 
with these requirements provides a reasonable level of assurance that your 
use of this product in a residential environment will not result in harmful 
interference with other electronic devices. This equipment generates/uses 
radio frequencies and, if not installed and used according to the 
instructions found in the users manual, may cause interference harmful to 
the operation of other electronic devices. Compliance with FCC regulations 
does not guarantee that interference will not occur in all installations. If this 

product is found to be the source of interference, which can be determined 
by turning the unit “OFF” and “ON”, please try to eliminate the problem by 
using one of the following measures:
Relocate either this product or the device that is being affected by the 
interference.
Utilize power outlets that are on different branch (circuit breaker or fuse) 
circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the antenna. If the 
antenna lead-in is 300 ohm ribbon lead, change the lead-in to co-axial type 
cable.
If these corrective measures do not produce satisfactory results, please 
contact the local retailer authorized to distribute this type of product. If you 
can not locate the appropriate retailer, please contact Yamaha Corporation 
of America, Electronic Service Division, 6600 Orangethorpe Ave, Buena 
Park, CA90620
The above statements apply ONLY to those products distributed by 
Yamaha Corporation of America or its subsidiaries.

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA.

(class B)

Содержание S03 voice editor

















































































































Отзывы:

Нет отзывов

Похожие инструкции для S03 voice editor

Panasonic WJ-ND300 Administrator Console Operating Instructions Manual preview
WJ-ND300 Administrator Console
Бренд: Panasonic Страницы: 27
Yamaha MOTIF RACK ES Supplementary Manual preview
MOTIF RACK ES
Бренд: Yamaha Страницы: 37
KAPERSKY CORPORATE SUITE Manual preview
CORPORATE SUITE
Бренд: KAPERSKY Страницы: 36
National Instruments NI-DNET User Manual preview
NI-DNET
Бренд: National Instruments Страницы: 86
IBM E16RMLL-I - Tivoli Storage Manager Implementation Manual preview
E16RMLL-I - Tivoli Storage Manager
Бренд: IBM Страницы: 828
Autodesk AutoCAD Civil 3D 2013 User Manual preview
AutoCAD Civil 3D 2013
Бренд: Autodesk Страницы: 25
Autodesk ALIAS DESIGN Brochure preview
ALIAS DESIGN
Бренд: Autodesk Страницы: 12
Autodesk 235B1-05A761-1301 - AutoCAD MEP 2010 User Manual preview
235B1-05A761-1301 - AutoCAD MEP 2010
Бренд: Autodesk Страницы: 878
Autodesk AUTOCAD 2006 Command Reference Manual preview
AUTOCAD 2006
Бренд: Autodesk Страницы: 1490
DeLorme Topo North America User Manual preview
Topo North America
Бренд: DeLorme Страницы: 369
Garmin Pilot for Android User Manual preview
Pilot for Android
Бренд: Garmin Страницы: 150
Konica Minolta Crown Print Monitor+ Administrator'S Manual preview
Crown Print Monitor+
Бренд: Konica Minolta Страницы: 28
Denon DP-200USB Service Manual preview
DP-200USB
Бренд: Denon Страницы: 38
Adaptec CDP-00278-02-A User Manual preview
CDP-00278-02-A
Бренд: Adaptec Страницы: 133
BARIX Streaming Client User Manual preview
Streaming Client
Бренд: BARIX Страницы: 51
eCopy 3323B001 - imageFORMULA ScanFront 220e Installation And Setup Manual preview
3323B001 - imageFORMULA ScanFront 220e
Бренд: eCopy Страницы: 192
MINOLTA-QMS PageScope Software Manual preview
PageScope
Бренд: MINOLTA-QMS Страницы: 60
Oracle Secure Backup 10.3 Installation And Configuration Manual preview
Secure Backup 10.3
Бренд: Oracle Страницы: 174

Бренды по названию

Популярные бренды

Загрузить еще бренды