manualshive.com logo in svg

Yamaha RY30, Уполномоченное руководство по продукции

Поделиться
Скачать
Yamaha RY30 Скачать руководство пользователя страница 66

PATTERN MODE

Procedure: 

Use the and keys to move the

cursor to the desired parameter (the ‘‘>” and
“<’’symbols at the ends of the display screens

indicate that more parameters can be accessed
by moving the cursor past the indicated end of
the current screen). Use the [INC] and [DEC]
keys, the [DATA] slider, or the numeric keys to

set the parameters as required. The instrument

pads can be used to select the voice.

Press the [ENTER] key — “Sure” will

appear on the display. Press the [ENTER] key
again to modify the parameter or press [EXIT]
to cancel the operation. “Complete!” will appear
on the display briefly when the parameter has
been modified.

Notes: 

This function makes it possible to modify the

sound of a voice within a pattern without actually

editing the voice.

The velocity value functions as an “offset”

from the standard setting of +32.

If you specify a pattern that does not contain

the selected voice, the “No Data Converted”

error message will appear on the display when

the operation is executed, and the operation will

be cancelled.

If the pattern size limit is exceeded, the

“!Too Large Pattern!” error message will

appear.

“! Memory Full !” will appear on the display

if there is not enough pattern memory available

to complete the operation.

JOB 06: SWING

58

Summary: 

Sets the amount of “swing” feel applied

to the specified voice of the specified pattern.

Settings: 

Source pattern number: 000 . . . 199

Voice: Any voice used in the pattern — I00 . . .

I95 (internal), C00 . . . C31 (card)

Clock: -11 . . . +11 (Quantization l/08),

- 5 . . .+5 

(Quantization l/16)

Destination pattern number: 000 . . . 099

Procedure: 

Use the  and keys to move the

cursor to the desired parameter (the ‘‘>” and
“<” symbols at the ends of the display screens

indicate that more parameters can be accessed
by moving the cursor past the indicated end of
the current screen). Use the [INC] and [DEC]
keys, the [DATA] slider, or the numeric keys to
set the parameters as required. The instrument

pads can be used to select the voice.

Press the [ENTER] key “Sure” will

appear on the display. Press the [ENTER] key
again to applied the specified swing parameters

and copy the resultant pattern, or press [EXIT]

to cancel the operation. “Complete!” will appear

on the display briefly when the swing operation
has finished.

Notes: 

If you specify 

a 

pattern that does not contain

the selected voice, the “!No Data Converted!”

error message will appear on the display when

the operation is executed, and the operation will

be cancelled.

If the pattern size limit is exceeded, the

“!Too Large Pattern!” error message will

appear.

“! Memory Full !” will appear on the display

if there is not enough pattern memory available

to complete the operation.

Содержание RY30






























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды