Yamaha RY30 Скачать руководство пользователя страница 24

Страница: 24 / 125

System Power-on

Procedure

Believe it or not, there’s a right way and a wrong way to turn on the components

in any music system.

In general, instruments and preamplifiers/mixers should always be turned on

before subsequent power amplifiers, and preamplifier/mixer master volume con-
trols should be turned all the way down when the system is being powered up.
Failure to do this properly can result in damage to your power amplifiers and
speakers.

Also, MIDI transmitting devices should be turned on before the associated

receiving device.

1. Make sure your sound system’s volume control(s) and the RY30 volume

control are turned all the way down prior to turning power on.

2. Turn on the master keyboard (if used).

3. Turn on the sequencer (if used).

4. Turn on the RY30.

5. Turn on the sound system.

6. Raise the sound system volume to a reasonable level.

7. Gradually raise the RY30 [VOLUME] control while playing the pads to set

the desired listening level.

Содержание RY30






























































































































Результаты поиска

Содержание RY30

Отзывы:

Бренды по названию

Популярные бренды

Yamaha RY30, Уполномоченное руководство по продукции

Результаты поиска

Содержание RY30

Отзывы:

Бренды по названию

Популярные бренды