Yamaha RY30, Уполномоченное руководство по продукции

Страница: 111 / 125

ERROR MESSAGES
ERROR MESSAGES
Things do go wrong from time to time, and people do make mistakes. When an error occurs, the RY30 will usually
display a message that describes the type of error so you can take steps to rectify the problem. The following are
quick summaries of the RY30 error displays.
You have attempted to record using a preset
pattern number. The preset patterns (100 . . . 199)
cannot be re-recorded or edited.
Insufficient memory remains to complete the
function or job you have initiated. You will have to
delete some songs and/or patterns to make room for
the new data.
You have attempted to change the length or time
signature of a pattern that has already been
recorded. Length and time signature settings can
only be made before a pattern is recorded.
A pattern you have created by recording, merg-
ing, appending, or other means exceeds the memory
space allotted to a single pattern. The size of the
pattern must be reduced by simplifying its compo-
nent parts before merging, appending, etc.’
You have attempted to enter a value that is not
appropriate for the selected parameter. Refer to the
appropriate function in the manual and check the
allowable settings.
You have attempted to perform a MIDI bulk
transmission while the RY30 device number is set
to “OFF”. Select a device number matching that of
the receiving device prior to performing a bulk
transmission.
You have attempted to use the parameter record
or clock move functions on a blank pattern. These
functions will only work on a pattern that has
already been recorded using the real-time or step-
write recording methods.
Unrecognizable MIDI data has been received.
Check your MIDI connections, and make sure that
the transmitting device is compatible with the
RY30. Faulty MIDI cables can sometimes cause
this error.
A song created using copy, insert, or other func-
tions exceeds the maximum of 999 parts. The num-
ber of parts in the song must be reduced.
103