manualshive.com logo in svg

Yamaha RY30, Уполномоченное руководство по продукции

Yamaha RY30 - удивительный цифровой сэмплер и барабанная машина. Улучшите свое музыкальное творчество, загрузив бесплатное Руководство по эксплуатации с нашего сайта manualshive.com. Этот документ поможет вам максимально использовать все возможности этого устройства для создания уникальных звуков и мелодий. Не упустите шанс улучшить свое музицирование.

Поделиться
Скачать
background image

FCC INFORMATION (U.S.A.)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by

Yamaha may void your authority, granted by the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this

product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the

USA.

3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B” digital devices.

Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in

harmful interference with other electronic devices. This equipment generates/uses radio frequencies and. if not installed and used according to the

instructions found in the users manual, may cause interference harmful to the operation of other electronic devices. Compliance with FCC regulations does

not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by
turning the unit “OFF” and “ON”, please try to eliminate the problem by using one of the following measures:

Relocate either this product or the device that is being affected by the interference.
Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to co-axial type

cable.
If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can

not locate the appropriate retailer, please contact Yamaha Corporation of America, Electronic Service Division, 6600 Orangethorpe Ave, Buena Park, CA

90620

*  This applies only to products distributed by YAMAHA CORPORATION OF AMERICA.

WARNING: CHEMICAL CONTENT NOTICE!

Dette apparat overholder det gaeldende EF-direktiv
vedrørende radiostøj.

Cet appareil est conforme aux prescriptions de la direc-
tive communautaire 87/308/CEE.

Diese Geräte entsprechen der EG-Richtlinie

82/499/EWG und/oder 87/308/EWG.

This product complies with the radio frequency
interference requirements of the Council Directive

82/499/EEC and/or 87/308/EEC.

Questo apparecchio è conforme al D.M.13 aprile 1989

(Direttiva CEE/87/308) sulla soppressione dei radio-
disturbi.

Este producto está de acuerdo con los requisitos sobre
interferencias de radio frequencia fijados por el Consejo
Directivo 87/308/CEE.

YAMAHA CORPORATION

The solder used in the manufacture of this product contains LEAD. In addition, the electrical/electronic and/or plastic (where applicable)

components may also contain traces of chemicals found by the California Health and Welfare Agency (and possibly other entities) to cause

cancer and/or birth defects or other reproductive harm.

DO NOT REMOVE ANY ENCLOSURE COMPONENTS! There are no user serviceable parts inside. All service should be performed by

a service representative authorized by Yamaha to perform such service.
IMPORTANT MESSAGE: Yamaha strives to produce products that are both user safe and environmentally “friendly”. We sincerely

believe that our products meet these goals. However, in keeping with both the spirit and the letter of various statutes we have included the

messages shown above and others in various locations in this manual.

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA.

CANADA

THIS DIGITAL APPARATUS DOES NOT EXCEED THE

“CLASS B” LIMITS FOR RADlO NOISE EMISSIONS
FROM DIGITAL APPARATUS SET OUT IN THE RADIO
INTERFERENCE REGULATION OF THE CANADIAN
DEPARTMENT OF COMMUNICATIONS.

LE PRESENT APPARElL NUMERIQUE N’EMET PAS DE
BRUITS RADlOELECTRlQUES DEPASSANT LES LIMITES

APPLICABLES AUX APPAREILS NUMERIQUES DE LA

“CLASSE B” PRESCRlTES DANS LE REGLEMENT SUR LE
BROUILLAGE RADIOELECTRIQUE EDICTE PAR LE

MlNlSTERE DES COMMUNICATIONS DU CANADA.

* This applies only to products distributed by YAMAHA

CANADA MUSlC LTD.

Litiumbatteri!
Bör endast bytas av servicepersonal.
Explosionsfara vid felaktig hantering.

VAROlTUS!

Lithiumparisto, Räjähdysvaara.
Pariston saa vaihtaa ainoastaan alan
ammattimies.

ADVARSEL!
Lithiumbatteril
Eksplosionsfare. Udskiftning må kun foretages
af en sagkyndig, — og som beskrevet i
servicemanualen.

Содержание RY30






























































































































Отзывы:

Нет отзывов

Похожие инструкции для RY30

Pyle PTED01 Manual preview
PTED01
Бренд: Pyle Страницы: 20
Pyle PED-021M User Manual preview
PED-021M
Бренд: Pyle Страницы: 20
Medeli DD6 User Manual preview
DD6
Бренд: Medeli Страницы: 13
First Act MD890 Assembling Instructions preview
MD890
Бренд: First Act Страницы: 4
First Act Discovery FD113 Instruction Manual preview
Discovery FD113
Бренд: First Act Страницы: 2
Full Bucket Music Bucket Pops Manual preview
Bucket Pops
Бренд: Full Bucket Music Страницы: 16

Бренды по названию

Популярные бренды

Загрузить еще бренды