manualshive.com logo in svg

Yamaha RX10RW, Руководство пользователя, Страница: 96 / 108

Поделиться
Скачать
Yamaha RX10RW Скачать руководство пользователя страница 96

9-2

2. Remove the shroud and the right side

cover. (See pages 8-5–8-7 for removal
procedures.)

3. Remove the red (+) connecting lead

from the lead holder and move it away
from the black (-) connecting lead.

CAUTION:

@ 

Be sure to connect the red (+) jumper
cable to the red (+) connecting lead and
the black (-) jumper cable to the black (-)
connecting lead. Do not reverse the
connections. 

@

4. Pull the red (+) connecting lead cover

to expose the terminal through the slit
in the cover, and then connect the red
(+) jumper cable to the red (+) connect-
ing lead.

5. Connect the other end of the red (+)

jumper cable to the positive (+) terminal
of the booster battery.

6. Connect the black (-) jumper cable to

the negative (-) terminal of the booster
battery.

7. Pull the black (-) connecting lead cover

to expose the terminal through the slit
in the cover, and then connect the black
(-) jumper cable to the black (-) con-
necting lead.

E_8fp.book  Page 2  Tuesday, March 28, 2006  4:35 PM

Содержание RX10RW













































































































Отзывы:

Нет отзывов