20
A
BASS EXTENSION switch
When this switch is pressed inward (ON), boosts bass
frequency response at the main left and main right channels
while maintaining overall tonal balance. If you do not have a
subwoofer, the use of this switch will be effective to reinforce
the bass frequencies.
B
TONE BYPASS switch
When this switch is pressed inward (ON), the input signal does
not pass through the tone (BASS and TREBLE) control
circuitry so that it is unaffected by the tone control circuitry. Use
this switch to obtain pure sound and to check the tone control
setting. Press this switch to release it outward (OFF) to use the
tone control circuitry.
C
Preset station number selector buttons
Select a preset station number (1 to 8).
D
Tone controls
These controls are effective only for the sound from the main
speakers.
BASS
Used to increase or decrease the low frequency response.
The 0 position produces flat response.
TREBLE
Used to increase or decrease the high frequency response.
The 0 position produces flat response.
E
BALANCE control
This control is effective only for the sound from the main
speakers.
Adjusts the balance of the output volume to the left and right
speakers to compensate for sound imbalance caused by
speaker location or listening room conditions.
F
FM/AM button
Press this button to switch the reception band to FM or AM.
G
MEMORY (MAN’L/AUTO FM) button
When this button is pressed, the “MEMORY” indicator flashes
for about 5 seconds. During this period, select a desired
preset station number by pressing the corresponding preset
station number selector button to enter the displayed station
into the memory.
When this button is pressed and held for more than 3 seconds,
the automatic preset tuning begins. (For details, refer to page
34.)
H
EDIT button
This button is used to exchange the places of two preset
stations with each other.
I
TUNING DOWN/UP button
Used for tuning. Press the “UP” side to tune in to higher
frequencies, and press the “DOWN” side to tune in to lower
frequencies.
J
TUNING MODE (AUTO/MAN’L MONO) button
Press this button to switch the tuning mode to automatic or
manual. To select the automatic tuning mode, press this
button so that the “AUTO TUNING” indicator lights up on the
display. To select the manual tuning mode, press this button
so that the “AUTO TUNING” indicator goes off.
K
DELAY/CENTER/REAR/SWFR button
Whenever pressed, selects the item of changing delay time
(DELAY), center speaker output level (CENTER), rear speaker
output level (REAR) and subwoofer output level (SWFR) in
turn.
* Depending on a mode of this unit, the number of selections
differs. For example, when the built-in digital sound field
processor (including the Dolby Pro Logic Decoder or the
Dolby Digital (AC-3) Decoder) is off, only the item for
changing subwoofer output level can be selected.
L
–/+ button
Adjusts the level of item selected by pressing the
DELAY/CENTER/REAR/SWFR button. Moreover, performs
setting changes and adjustments for functions selected by
pressing the SET MENU button.
M
SET MENU button
Whenever pressed, selects functions in the SET MENU mode.
N
VIDEO AUX terminals
Connect an auxiliary video or audio input source unit such as a
camcorder to these terminals. If the connected video unit has a
S video output terminal, connect it to the S VIDEO terminal to
obtain a high resolution picture. The source connected to these
terminals can be selected by the corresponding input selector
button.
