Yamaha RX-V396, Руководство по обслуживанию

Страница: 20 / 76

19
RX-V396/RX-V396RDS/HTR-5230/HTR-5230RDS
No.11 EEPROM WRITING FUNCTION
The check sum value confirmation of EEPROM and data writing.
Signal route is the same as "2. EFFECT OFF" of "No. 4 PRO LOGIC".
No.12 CHECK SUM/VERSION/PORT SETTING/EXIT
The version, the check sum, and the port setting of the microcomputer are displayed.
Signal route is the same as "2. EFFECT OFF" of "No.4 PRO LOGIC".
By the sub-menu operation, the set exits the self-diagnousis mode and returns to the normal operation mode.
M:XXXX: The check sum value is displayed when the microcomputer has ROM
modification data.
0000 is displayed when there is no data.
E:XXXX: The check sum value is displayed when the EEPROM is installed on and
it has the ROM data .
000 is displayed when EEPROM is not mounted on or data is unusual.
If you want to write ROM modification data of the microcomputer into the
EEPROM, change to the next sub-menu.
M : X X X X E : X X X X
1 2 V E R : A 0 1
SUM: 9549A : The check sum of the microcomputer software is displayed.
VER:A01 : The version of the microcomputer software is displayed.
EXIT
bit 7 6 5 4 3 2 1 0
0 1 0 0 0 1 0 0
Always absent (0)
Always absent (0)
Tuner Mode V1 (*2)
Tuner Mode V2 (*2)
Always absent (0)
Always absent (0)
Model Type RDS (*1)
Model Type DSP-A (*1)
1 2 S U M : 9 5 4 9 A
1 2 P : 0 1 0 0 0 1 0 0
Check sum
Version
*1 Model type distinction (H=1, L=0)
DSP-A (Pin 3) 0 0 1 1 RX-V396RDS
RDS (Pin 6) 0 1 0 1 HTR 5230RDS
RX-V396
HTR-5230
DSP-R396
DSP-E DSP-A
*2 Destination distinction of Tuner (H=1, L=0)
V1 (Pin 4) 0 J 0 U,C 1 A,B,G 1 R,T
V2 (Pin 5) 0 model 1 models 0 models 1 models