RX-V3200/DSP-AX3200
RX-V3200/DSP-AX3200
29
THM/FAN OUT
(temperature detection/fan drive level)
THM: 500% display of the voltage based on the temperature detected value. Reference
voltage : 5V
(Normal value: U, C models ..... 51 to 169
Others models ..... 41 to 151)
Fan: Current fan drive level on the left and the past fan drive level history on the right.
[Table 1]
IMP SW/POWER LIMIT
(Impedance/power limiter detection)
IMP: 8 or 4 ohm impedance switch setting
PL: Power limiter detection value
The voltage of No.135 pin of IC520 is expressed with 5V/256 used as reference.
K0/K1
(Panel key of main unit)
A/D of the key fails to function properly when the standard value is deviated by
±
4%. In
this case, check the constant of partial pressure resistor, solder condition, etc. Refer to
table 2.
Display
REC OUT Select
0+2
CD-R
15
±
2
CBL/SAT
30
±
2
PHONO
44
±
2
V-AUX
60
±
2
MD/TAPE
76
±
2
D-TV/LD
92
±
2
PHONO
122
±
2
TUNER
137
±
2
VCR1
153
±
2
CD
170
±
2
VCR2/DVR
186
±
2
SOURCE
202
±
2
DVD
13. AD DATA CHECK/FAN TEST
This menu is used to display the A/D conversion value of the main CPU which detects panel keys of the main unit and
protection functions in % using the sub-menu. (Reference voltage 5V as 100%) During signal processing, the condition
before execution is maintained.
When K0/K1 menu is selected, keys become non-operable due to detection of the values of all keys. However, it is
possible to advance to the next sub-menu by turning the VOLUME of the main unit. When using this function, note that
turning the VOLUME more than 1 click would cause the volume value to change.
* The figures in the diagram are given as reference only.
DC/PS
(protection detection)
DC: DC detect protection value (Normal value: 1 to 13)
PS: Power supply voltage protection value (Normal value: 21 to 31)
* If DC or PS is out of the normal value range, the protection function works to turn off the
power.
REC-OUT
(Select position)
Display
H
M
L
Fan drive level
HIGH MID
LOW
Display
K0
K1
00+2
PRESET/TUNING
–
10
±
2
PRESET/TUNING
INPUT
20
±
2
PRESET/TUNING
INPUT
30
±
2
FM/AM
INPUT MODE
40
±
2
MEMORY
SPEAKERS A
50
±
2
TUNING MODE
SPEAKERS B
60
±
2
RDS MODE
EFFECT
70
±
2
RDS EON
PROGRAM
80
±
2
PTY MODE
PROGRAM
90
±
2
PTY START
A/B/C/D/E
100
KEY OFF
KEY OFF
[Table 2]
