RX-V3200/DSP-AX3200
RX-V3200/DSP-AX3200
• Functions in DIAG mode
In addition to the DIAG menu items, functions as listed below are available.
• Input selection, 6CH input
• Center/Rear/Rear Center/Sub-woofer level adjustment
• Muting
• Speaker relay A/B
• Power on/off
• Master volume
* Functions related to the tuner and the set menu are not available.
* It is possible to confirm Menu No.14 IF STATUS while keeping the signal process (operation status) of each DIAG menu
by using the input mode key of the main unit.
• Initial settings used to start DIAG
The following initial settings are used when starting DIAG.
When DIAG is canceled, these settings are restored to those before starting DIAG.
• Master volume: -40dB
• Input: DVD (6CH INPUT OFF)
• Effect level: 0dB
• Audio mute: OFF
• Speaker relay A/B: ON
• Speaker setting: LARGE / BASS OUT = BOTH
• DIAG menu: YSS938 (1. ANALOG BYPASS)
• Operation procedure of DIAG menu and SUB-MENU
There are 18 MENU items, each of which has some SUB-MENU items.
DIAG menu selection
Main unit [U, C, A, R, T models]: Select the menu using (Forward) and (Reverse)
keys of PRESET/TUNING located in the sealing panel.
Main unit [B,G models]: Select the menu using + (Forward) and - (Reverse) keys of SET
MENU located in the sealing panel.
Remote control unit: Select the menu using
∆
(Forward) and
∇
(Reverse) keys.
SUB-MENU selection
Main unit: Select the sub-menu using (Forward) and (Reverse) keys of PROGRAM
located in the sealing panel.
Remote control unit: Select the sub-menu using + (Forward) and - (Reverse) keys.
DIAG menu selection
SUB-MENU selection
PROGRAM
PRESET/
TUNING
[U, C, A, R, T models]
[B, G models]
DIAG menu selection
SUB-MENU selection
SET MENU
PROGRAM
Use these keys for
SUB-MENU selection.
Use these keys for
DIAG menu selection.
[REMOTE CONTROL]
16