Yamaha RX-V1083, Быстрый старт

Страница: 13 / 64

En
13
6
Connecting the power cable to an AC wall outlet,
and turning on the unit
1
Plug the power cable into an
AC wall outlet.
2
Press
z
(receiver power) to
turn on the unit.
3
Turn on the TV and switch the
TV input to display video from
the unit (HDMI OUT jack).
The Network Setup screen shown below will be
displayed on the TV when the unit is turned on for
the first time after purchase. It may take several
tens of seconds for the screen to be displayed
(WAC: Wireless Accessory Configuration).
See “Sharing the iOS device setting” under
“Connecting the unit to a wireless network” in the
Owner’s Manual when using this function to
connect the unit to a network.
This document explains wireless connection
using methods other than this function. Follow
the procedure described under “Connecting the
unit to a network” on the next page.
Note
This screen will not be displayed if the unit is connected
to a router via its NETWORK jack (wired connection).
Before connecting the power cable
(Taiwan, Brazil and General models only)
Set the switch position of VOLTAGE
SELECTOR according to your local voltage.
Voltages are AC 110–120/220–240 V,
50/60 Hz.
VOLTAGE SELECTOR
220V-
240V
110V-
120V
AC IN
To an AC
wall outlet
VOLTAGE SELECTOR
(Taiwan, Brazil and General models only)
3 2 1
AUDIO
2 4 3 1
6 V-AUX 7 5
AV
BLUETOOTH NET
PHONO
USB TUNER
HDMI OUT PARTY
MAIN ZONE 2
3 2 1
AUDIO
2 4 3 1
6 V-AUX 7 5
AV
BLUETOOTH NET
PHONO
USB TUNER
HDMI OUT PARTY
MAIN ZONE 2
z