En
13
Select the speaker layout depending on the number of speakers and place the speakers and subwoofer (with built-in amplifier) in your room. This section describes the
representative speaker layout examples.
• For information on the ideal speaker layout, see “Ideal speaker layout” (p.116).
• If you have 7 speakers, use two of them as surround back speakers or presence speakers. To reinforce the rear right/left sound field, use them as surround back speakers.
To create a natural stereoscopic sound field, use them as presence speakers.
1
Placing speakers
Caution
• This unit is configured for 8-ohm speakers at the factory. When connecting 6-ohm speakers, set the speaker impedance of this unit to “6
Ω
MIN”. In this case, you can also use 4-ohm speakers as the front speakers. For
details, see “Setting the speaker impedance” (p.16).
Speaker type
Abbr.
Function
Speaker system (the number of channels)
7.1+2
7.1
7.1
6.1
5.1
4.1
3.1
2.1
Front (L)
Produce front right/left channel sounds (stereo sounds).
●
●
●
●
●
●
●
●
Front (R)
●
●
●
●
●
●
●
●
Center
Produces center channel sounds (dialogs, vocals, etc).
●
●
●
●
●
●
Surround (L)
Produce surround right/left channel sounds. Surround speakers also produce surround back channel sounds when
no surround back speakers are connected.
●
●
●
●
●
●
Surround (R)
●
●
●
●
●
●
Surround back (L)
Produce surround back right/left channel sounds.
●
●
Surround back (R)
●
●
Surround back
Produces mixed-down surround back right/left channel sounds.
●
Presence (L)
Produce CINEMA DSP effect sounds. In combination with CINEMA DSP 3D (p.43), the presence speakers create a
natural stereoscopic sound field in your room.
●
●
Presence (R)
●
●
Subwoofer
Produces LFE (low-frequency effect) channel sounds and reinforces bass parts of other channels.
This channel is counted as “0.1”.
●
●
●
●
●
●
●
●
1
Speaker placement
2 3 4 5 6 7 8 9
Содержание RX-A710
Страница 128: ... 2011 Yamaha Corporation YD458B0 OMEN1 ...
