En
91
❑
Surround Back
Selects whether or not surround back speakers are connected and its size.
Settings
❑
Front Presence
Selects whether or not presence speakers are connected.
Settings
❑
Subwoofer
Selects whether or not subwoofer is connected and its phase.
Settings
• When the bass sound is lacking or unclear, switch the subwoofer phase.
❑
Extra Bass
Sets the speakers to produce the front channel low-frequency components.
Settings
• This setting is not available when “Subwoofer” is set to “None” or “Front” is set to “Small”.
❑
Bass Cross Over
Sets the lower limit of low-frequency component produced from speakers of which the
size is set to “Small”. A frequency sound lower than the specified value will be
produced from the subwoofer or front speakers
Settings
40Hz, 60Hz, 80Hz (default), 90Hz, 100Hz, 110Hz, 120Hz, 160Hz, 200Hz
• If the volume and cross-over frequency are adjustable on your subwoofer, set the volume to half and cross-
over frequency to maximum.
■
Distance
Sets the distance between each speaker and listening position so that sounds from the
speakers reach the listening position at the same time. First, select the unit of distance
from “Meter” or “Feet”.
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, Front
Presence L, Front Presence R, Subwoofer
Setting range
0.30m ~ 24.00m (1.0ft ~ 80.0ft) *0.05m (0.2ft) steps
Default
3.00m (10.0ft)
Large x1
Select this when 1 large speaker is connected.
The surround back speaker will produce all of the surround back channel
frequency components.
Large x2
Select this when 2 large speakers are connected.
The surround back speakers will produce all of the surround back channel
frequency components.
Small x1
Select this when 1 small speaker is connected.
The subwoofer will produce surround back channel low-frequency
components (configurable in “Bass Cross Over”).
Small x2
(default)
Select this when 2 small speakers are connected.
The subwoofer will produce surround back channel low-frequency
components (configurable in “Bass Cross Over”).
None
Select this when no surround back speakers are connected.
The surround speakers and subwoofer (or front speakers) will produce
surround back channel audio.
Use (default)
Select this when presence speakers are connected.
None
Select this when no presence speakers are connected.
Use
Normal
(default)
Select this when a subwoofer is connected (not to reverse the phase).
The subwoofer will produce LFE (low-frequency effect) channel audio
and low-frequency components from other channels.
Reverse
Select this when a subwoofer is connected (reverse the phase). The
subwoofer will produce LFE (low-frequency effect) channel audio and
low-frequency components from other channels.
None
Select this when no subwoofer is connected. The front speakers will
produce LFE (low-frequency effect) channel audio and low-frequency
components from other channels.
Off (default)
Depending on the size of the front speakers, either the subwoofer or
front speakers produce the front channel low-frequency components.
On
Both the front speakers and subwoofer produce the front channel low-
frequency components.
Содержание RX-A710
Страница 128: ... 2011 Yamaha Corporation YD458B0 OMEN1 ...
