Yamaha RX-A3000, Руководство пользователя

Страница: 46 / 201

CONNECTIONS
Setting up the speaker parameters automatically (YPAO)
En
46
8
Replace the optimizer microphone at your
choosing position and press
i
ENTER to
restart the automatic measurement.
Auto measurement restarts in 10 seconds.
Repeat step 8 until the measurement at all listening
positions are made.
The calculation based on result of measurement starts
when measurement at the last position finishes without
any problem.
When “Angle” is set to “No” in step 6
The following display appears when the calculation
finishes without any problems.
Go to step 14.
When “Angle” is set to “Yes” in step 6
The following display appears when the calculation
finishes without any problems.
Go to step 9.
9
Press
i
Cursor
D
/
E
to select “YES” and
press
i
ENTER .
The following display appears.
ENTER ENTER
SOURCE RECEIVER
AV
AUDIO
4 3 1 2
7 5 6 V-AUX
4 3 1 2
USB MULTI NET PHONO
TUNER DOCK SIRIUS
[ A ]
i
The following illustration shows how to place the
optimizer microphone to optimize the setup of this
unit for eight listening positions for example. Up to 8
listening positions can be measured.
J
1
6
8
7
4 5
1 2 3
S a v e / E x i t
M e a s u r e . F i n i s h YPAO
VOLUME
> Y e s N o
A n g l e M e a s u r e ?
YPAO
VOLUME
E N T E R t o S t a r t
A n g l e : P o i n t 1
YPAO
VOLUME
Continues to the
next page
J
1 :
Measure from the most frequent listening position, such as
directly in front of the TV, first.