Yamaha RX-A3000, Руководство пользователя

Страница: 140 / 201

SETUP
Controlling the remote control to operate various functions
En
140
Macro programming features
The macro programming feature makes it possible to
perform a series of operations with the press of a single
button. For example, when you want to play a CD,
normally you would turn on the components, select the
CD input, and press the play button to start playback.
The macro programming feature lets you perform all of
these operations simply by pressing the macro button.
The buttons listed as macro buttons below are factory set
with macro programs. You can also program your own
macros.
■
Recalling programmed macro
operations
1 Press
C
SETUP .
“SETUP” appears in the display window.
2
Press
i
Cursor
B
/
C
repeatedly to select
“MACRO” and press
i
ENTER .
3
Press
i
Cursor
B
/
C
repeatedly to select
“ON” and press
i
ENTER .
Press a macro button (
l
RECEIVER
A
or
d
Input
selector
) to perform the macro operation assigned
to the button.
■
Programing macro operations
You can program your own macro to transmit several
remote control commands in sequence at the press of a
button. Be sure to set up remote control codes or perform
learning operations before programming the macro.
1
Press
C
SETUP .
“SETUP” appears in the display window.
2 Press
i
Cursor
B
/
C
repeatedly to select
“MACRO” and press
i
ENTER .
3 Press
i
Cursor
B
/
C
repeatedly to select
“EDIT” and press
i
ENTER .
4 Press the macro button (
l
RECEIVER
A
or
d
Input selector ) that you want to assign
the macro operations to.
SETUP
AV
AUDIO
4 4 3 1 2
7 5 6 V-AUX
4 3 1 2
USB MULTI NET PHONO
TUNER DOCK
ENTER
SIRIUS
[ A ]
SOURCE
RECEIVER
TUN./CH
CATEGORY
d
l
i
C
Pressing
macro
To automatically transmit these signals
First Second
RECEIVER
A
Turns on this unit
—
AV1-7
Switches
the input
source to:
AV1-7
V-AUX V-AUX
AUDIO1-4 AUDIO1-4
PHONO PHONO
MULTI MULTI
USB USB
NET NET
DOCK DOCK
TUNER TUNER
SIRIUS SIRIUS
[A] —
To exit the macro operation mode, press
i
Cursor
B
/
C
to select “OFF” and press
i
ENTER .
NOTES
• While the remote control is running a macro program
(the transmission indicator flashes), it does not accept
any other operation.
• Continue to aim the remote control at the component
the macro is operating until the macro operation is
complete.
MACRO
NOTE
We do not recommend that you program continuous
operations (for example, volume control) in a macro.
Continues to the
next page