Yamaha RX-A3000, Руководство пользователя

Страница: 50 / 201

CONNECTIONS
Setting up the speaker parameters automatically (YPAO)
En
50
When “E-7” or “E-8” is displayed:
1
Press
i
ENTER .
2
Check that the environment is suitable for
accurate measurement.
3
Press
i
Cursor
E
to select “RETRY.”
4
Press
i
ENTER to use YPAO again.
When “E-5” or “E-9” is displayed:
1
Press
i
ENTER .
2
Check that the environment is suitable for
accurate measurement.
3
Press
i
Cursor
D
/
E
to select a option.
PROCEED:
When “E-5” is displayed, measurement can proceed.
However, the measurement in noisy environment may
reduce the accuracy.
When “E-9” is displayed, resume the aborted step.
RETRY:
Restart measurement from the beginning.
4 Press
i
ENTER to execute the selected
option.
When “E-10” is displayed:
1
Press
i
ENTER .
2
Press
i
Cursor
E
to select “EXIT.”
3
Press
i
ENTER to terminate YPAO, and
switch the unit to standby mode.
4
Turn on the unit and use YPAO again.
■
When a warning message is
displayed after measurement
See “Warning messages” (
☞
p. 51 ) for instructions on
resolving the problem. The speaker causing the problem
can be confirmed from the TV screen display.
To exit YPAO with some options
1
Use
i
Cursor
B
/
C
to select “Save/Exit”
and press
i
ENTER .
2
Use
i
Cursor
D
/
E
to select one of the
following options and press
i
ENTER .
SAVE:
Exits YPAO applying the results of measurement.
CANCEL:
Returns to the previous screen (warning message
screen).
EXIT:
Exits YPAO without saving the results.
ENTER ENTER
SOURCE RECEIVER
AV
AUDIO
4 3 1 2
7 5 6 V-AUX
4 3 1 2
USB MULTI NET PHONO
TUNER DOCK SIRIUS
[ A ]
i
NOTE
Although the results of acoustics measurement can be
applied when a warning message is displayed, optimal
sound will not be achieved. Resolving the problem
and using YPAO to measure acoustics again is
recommended.