SUPPLIED ACCESSORIES
CONTROL PARTS AND THEIR FUNCTIONS
(See Fig
.
..
.
)
After unpacking, check that the following parts are
provided.
•
Remote control transmitter
•
Batteries
•
Remote control cable (6-pin)
o
Remote control cable (mini-plug)
e
AM loop antenna
o
Indoor FM antenna
(See Fig.
EI
.)
FRONT PANEL
0
POWER switch
Press this switch to turn the power on. Press the
switch again to turn the power off.
8
P1-P8/P9-P16 button
Press this button to change the range of preset
station buttons. When this button is pressed, the
selected range of the
PI-P8/P9-P16
indicators flickers
for about
5
seconds.
8
Display window
(DPRESET display
Preset station indicator
Lights up to indicate the pressed preset station
button.
P1-P8/P9-P16 indicators
Indicates the range (either
PI-PS
or P
9
-P1
6
) of
selectable preset station buttons.
®STATION FREQUENCY display
Displays the band and frequency of the received
radio signal.
@IF MODE AUTO/NARROW/WIDE indicator
AUTO:
When the Auto Mode is selected with the IF MODE
button, this indicator lights.
NARROW
or
WIDE:
When the NARROW or WIDE Mode is selected with
IF MODE button, the corresponding indicator lights.
@SIGNAL QUALITY indicators
These indicators display the signal strength of the
tuned frequency in bar-graph form.
0
marks a poor
or no signal, while
100
indicates an excellent signal.
@CSL (Computer Servo Lock)
This indicator lights when the Computer Servo Lock
(CSL) system is activated during FM reception
mode. For details, refer to ''Technical notes on the
Computer Servo Lock (CSL) system" descrived on
page
15.
@FINE TUNING
When the FINE TUNING button is operated, this
indicator lights.
Cl)INPUT indicator
Indicates the program source selected by the Input
selector.
@co
DIRECT indicator
Lights up while the CD DIRECT switch is set to
ON.
®SLEEP indicator
This indicator illuminates beginning from the time
that the SLEEP key of the remote-control transmitter
is pressed and until the SLEEP mode is
automatically canceled one hour later.
@STEREO indicator
When an FM stereo signal of sufficient strength is
received the STEREO indicator lights up.
@AUTO TUNING indicator
When the tuner is in automatic tuning mode, the
AUTO TUNING indicator lights.
@MEMORY indicator
When the MEMORY button is pressed , the
MEMORY indicator blinks on and off.
0
Preset station buttons
Up to
16
station frequencies and reception modes can
be stored using the preset station button.
0
Input selector {INPUT SELECTOR)
Used to select the program source to be heard. The
selected program source is indicated in the display.
9
