16
TO PLAY PROGRAM SOURCE
1.
Select the pmgram source to be heard with the
INPUT SELECTOR.
2.
Play the program source.
3.
Adjust the VOLUME and tone controls.
*
For details of the surround mode, refer to "USING
THE SURROUND SOUND PROCESSOR" on page
17.
TO RECORD PROGRAM SOURCE
1.
Select the program source to be recorded with the
REC OUT selector.
2.
To listen to the program source to be recorded,
press the left or right side of the INPUT
SELECTOR.
3.
Play the program source to be recorded and set
the tape deck or video cassette recorder to record
mode.
4.
To listen to other program source during recording,
select the program source to be listened to with
the INPUT SELECTOR.
When your tape deck has three head monitoring
capability, select the corresponding tape source with
the INPUT SELECTOR to listen to just recorded signal.
The settings of the SURROUND MODE selector, tone
controls, VOLUME control and TONE BYPASS switch
do not affect the recording.
TO DUB AUDIO TAPES
1.
Set the REC OUT selector to select the program
source (DAT(fAPE
1,
TAPE 2, VCR
1
or VCR 2) to
be dubbed.
2.
To listen to the program source to be recorded,
press the left or right side of the INPUT
SELECTOR.
3.
Set the tape decks or video cassette recorders to
play and record mode respectively.
4.
To listen to other program source during dubbing,
select the program source to be listened to with
the INPUT SELECTOR.
When your tape deck has three head monitoring
capability, select the corresponding tape source with
the INPUT SELECTOR to listen to just recorded signal.
The settings of the SURROUND MODE selector, tone
controls, VOLUME control and TONE BYPASS switch
do not affect the dubbing.
TO RECORD VIDEO SOURCES
1.
Select the desired program source to be recorded
with the REC OUT selector.
2.
Set the VCR for recording to the record-pause
mode.
3.
Play the video source to be recorded and start
recording with the recording VCR at the same time.
TO DUB VIDEO TAPES
1.
Set the REC OUT SELECTOR to select the program
source to be dubbed.
2.
Set the video cassette recorders to play and record
mode respectively.
3.
To listen to other program source during dubbing,
select the program source to be listened to with
the INPUT SELECTOR.
The settings of the SURROUND MODE button, tone
controls, VOLUME control and TONE BYPASS switch
do not affect the dubbing.
TIPPING THE OPERATION PANEL
The operation panel, which is located at the lower side
of the front panel, may be tipped in and out.
When it is not necessary to operate buttons or
controls on this panel you may tip this panel back
inside the unit, as shown in the figure.
When the operation panel is desired, tip it toward you,
as shown in the figure.
