97
E
nh
an
cin
g s
ec
ur
ity
5
Create a filter by entering a filter
command directly
You can also enter a filter command directly to create a
filter. Creating a filer command previously by using a text
editor program is convenient when you want to apply a
filter to multiple routers.
To enter a filter command directly, use the “Execute
command” screen in the “Basic configuration page”.
Tip
For examples of more professional filter settings and the grammar,
please refer to “Command reference” (included in the attached
CD-ROM) or the Yamaha network peripheral equipment website
(http://www.yamaha.com/products/en/network/).
To open the “Execute command” screen
From “Basic configuration page”, click the buttons on the
setup screen in the following order:
▶
“Advanced settings” in the top page
▶
“Execute” of “Execute command”
Create a filter manually in “Basic
configuration page”
To configure filter settings, use the “Configure firewall”
screen.
Note
• When you select LAN, PCs connected to the LAN ports and
all PCs connected to the hubs that are connected to the LAN
ports are the targets.
• Please refer to “Command reference” (included in the attached
CD-ROM) for examples of actual filter settings.
For more details on the settings, click “Help” on the setup
screen and refer to the description displayed.
To open the “Configure firewall” screen
From “Basic configuration page”, click the buttons on the
setup screen in the following order:
▶
“Advanced settings” in the top page
▶
“Configure” of “Configure firewall”
▶
“Configure” of the interface for which you want to
configure the firewall (“Configure” of “IPv4 filter” for
setting with IPv4, or “Configure” of “IPv6 filter” for
setting with IPv6).
