2 - Specifying your provider
information
1
Fill in
3
Click
2
Specify
1
Enter the configuration name.
Enter a descriptive destination name. It is a good idea to name the configuration so that you can
easily identify it when it needs to be modified.
2
Specify the WAN IP address.
If the IP address is not assigned by your provider:
Click “DHCP client” to select it.
If the DHCP client identification name is assigned by your provider, enter that identification name
in the “DHCP client identification name” (there is no need to enter it if it is not assigned by your
provider).
If the IP address is assigned by your provider:
Click “Specified IP address” and then configure the following settings.
•
WAN IP address:
Enter the IP address assigned by your provider in numeric characters.
•
Netmask:
Select the netmask assigned by your provider.
•
Default gateway:
Enter the default gateway address assigned by your provider in numeric
characters.
3
Click “Next”.
The “Configure provider 3/4” screen appears.
40
C
on
ne
cti
ng
to
th
e I
nt
er
ne
t
3
B
Terminal broadband connection
over DHCP (i.e. CATV Internet)
(from page 35)
