134
O
pe
ra
tin
g a
nd
m
an
ag
in
g t
he
p
ro
du
ct
7
Saving the configuration
information and log to an
external memory device
You can save the configuration information and log of
the product to a commercially-available external memory
device (USB memory stick or microSD card). Compared
with backup via a PC, information required for operation
and management can be collected more easily.
Note
• External memory devices used for the product must be
formatted in FAT or FAT32.
• You cannot use a USB hub to connect two or more USB
memory sticks or other external memory devices to the
product.
• Some types of USB extension cables may not be able to work
normally. Use the USB memory stick by inserting it directly
into the USB port of the product.
• Do not remove the external memory device while the USB
lamp or microSD lamp of the product is lit up or flashing.
Doing so may damage data in the external device. Before
removing the external device, hold down the USB button or
microSD button for two seconds and make sure that the USB
lamp or microSD lamp has gone off.
Save the configuration information
of the product to an external memory
device
1
Insert the external device into the USB port
or microSD slot of the product.
The USB lamp or microSD lamp of the product lights
up or flashes.
2
In the “Source file name to copy” field on
the “Copy configuration and firmware files”
screen, select “Internal non-volatile memory”
and specify a config number.
To open the “Copy configuration and
firmware files” screen
From “Basic configuration page”, click the buttons on
the setup screen in the following order:
▶
“Advanced settings” in the top page
▶
“Execute” of “Copy configuration and firmware
files”
3
In the “Copied file name” field, enter a file name
used to save the configuration information of
the product to the external memory device.
4
Click “Execute”.
A confirmation screen appears.
Checking the configuration information and log of the
product
(Continued from the previous page)
