Yamaha RM1x Скачать руководство пользователя страница 32

Страница: 32 / 54

RM1x

●

Disk

Disk Full

This will appear if the floppy disk is full and has no room to save the file. Either use a

new floppy disk, or delete unneeded files before trying the operation once again.

File Not Found

When loading, this will appear if the specified file does not exist in the floppy disk.

Insert the disk once again, and try the operation again.

Bad Disk Format Now?

The floppy disk is faulty. Press the [Yes +1] button to format the disk.

(Y/N)

No Disk

This indicates that the floppy disk is not correctly inserted into the RM1x. Insert the

floppy disk correctly.

Unformat Format Now?

This will appear if the floppy disk is not formatted. Press the [Yes +1] button to format

(Y/N)

the disk.

Write Protected

This will appear if the write-protect slider of the floppy disk is in the write prohibit

position. Remove the floppy disk, close the write-protect slider, and try the operation

once again.

Bad File

This will appear when you attempt to load a defective file.

Illegal Format

This will appear if the floppy disk is of a format which the RM1x is not able to handle.

Check the contents of the disk.

Disk Changed

This will appear if you have exchanged disks when you should not have. Try the

operation once again from the beginning.

Can’t Change File Name

When renaming, this will appear if the floppy disk already contains a file with a name

identical to the specified filename. Specify a different filename.

Illegal File

When loading, this will appear if the specified file cannot be handled by the RM1x.

Check the contents of the file.

No Data

When saving data to floppy disk, this will appear if the selected song or style contains

no data, and the save operation is invalid. Select a different song or style.

●

Messages other than error messages

Can’t Undo. Ok? (Y/N)

If executing a job would fill up the internal memory so that Undo will not be available,

this message will appear. If you are sure that you will not need to Undo this job,

press the [YES +1] button. To cancel without executing the job, press the [NO -1]

button, and delete unneeded songs, patterns, or user phrases before trying the

operation once again.

Are you sure? (Y/N)

Before an operation is executed, this message will ask you for confirmation. Use the

[YES +1]/[NO -1] button to either cancel or execute.

Completed

This will appear when the current process has been completed. Press any button

and the message will disappear.

Executing...

When loading, saving, or formatting, this message will appear while the job is being

executed. Please wait.

■

CONFIRMATION OF MIDI DATA

If you want to confirm the MIDI data, you can see them on the owner’s manual or PDF service manual.

Содержание RM1x























































Результаты поиска

Содержание RM1x

Отзывы:

Похожие инструкции для RM1x

Бренды по названию

Популярные бренды

Yamaha RM1x, Руководство по обслуживанию

Результаты поиска

Содержание RM1x

Отзывы:

Похожие инструкции для RM1x

Бренды по названию

Популярные бренды